Page 211 / 240
Scroll up to view Page 206 - 210
Basic Home Station VDSL2 P8701T User’s Guide
211
C
HAPTER
18
TR-069 Client
18.1
Overview
This chapter explains how to configure the VDSL Router’s TR-069 auto-configuration settings.
18.2
The TR-069 Client Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your VDSL Router, can be
managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending
Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible
Markup Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the VDSL Router, modify settings, perform
firmware upgrades as well as monitor and diagnose the VDSL Router. You have to enable the device
to be managed by the ACS and specify the ACS IP address or domain name and username and
password.
Click
Wireless network > Classic configuration > Management > TR-069 Client
to open the
following screen. Use this screen to configure your VDSL Router to be managed by an ACS.
Page 212 / 240
Chapter 18 TR-069 Client
Basic Home Station VDSL2 P8701T User’s Guide
212
Figure 96
TR-069 Client
The following table describes the fields in this screen.
Table 78
TR-069 Client
LABEL
DESCRIPTION
Inform
Select
Enable
for the VDSL Router to send periodic inform via TR-069 on the WAN.
Otherwise, select
Disable
.
Inform Interval
Enter the time interval (in seconds) at which the VDSL Router sends information to the auto-
configuration server.
ACS URL
Enter the URL or IP address of the auto-configuration server.
ACS User Name
Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password
Enter the TR-069 password for authentication with the auto-configuration server.
WAN Interface
used by TR-069
client
Select a WAN interface through which the TR-069 traffic passes.
If you select
Any_WAN
, you should also select the pre-configured WAN connection(s).
Display SOAP
messages on
serial console
Select
Enable
to show the SOAP messages on the console.
Connection
Request
Authentication
Select this option to enable authentication when there is a connection request from the ACS.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the VDSL Router, this user name is used to
authenticate the ACS.
Connection
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the VDSL Router, this password is used to
authenticate the ACS.
Page 213 / 240
Chapter 18 TR-069 Client
Basic Home Station VDSL2 P8701T User’s Guide
213
Connection
Request URL
This shows the connection request URL.
The ACS can use this URL to make a connection request to the VDSL Router.
Apply/Save
Click this button to save your changes.
Table 78
TR-069 Client (continued)
LABEL
DESCRIPTION
Page 214 / 240
Chapter 18 TR-069 Client
Basic Home Station VDSL2 P8701T User’s Guide
214
Page 215 / 240
Basic Home Station VDSL2 P8701T User’s Guide
215
C
HAPTER
19
Internet Time
19.1
The Internet
Time Screen
Click
Wireless network > Classic configuration > Management > Internet Time
to configure
the VDSL Router to get the time from time servers on the Internet.
Figure 97
Internet Time
The following table describes the fields in this screen.
Table 79
Internet Time
LABEL
DESCRIPTION
Automatically
synchronize with
Internet time
servers
Select this to have the VDSL Router get the time from the specified Internet time servers.
First ~ Fifth NTP
time server
Select an NTP time server from the drop-down list box.
Otherwise, select
Other
and enter the IP address or URL (up to 29 extended ASCII
characters in length) of your time server.
Select
None
if you don’t want to configure the time server.
Check with your ISP/network administrator if you are unsure of this information.
Time zone offset
Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
Apply/Save
Click this button to save your changes.
19216811.live