Page 201 / 240
Scroll up to view Page 196 - 200
Chapter 15 Diagnostic
Basic Home Station VDSL2 P8701T User’s Guide
201
Figure 89
802.1ag Connectivity Fault Management
The following table describes the fields in this screen.
Table 73
802.1ag Connectivity Fault Management
LABEL
DESCRIPTION
802.1ag Connectivity Fault Management
Maintenance
Domain (MD)
Level
Select a level (0-7) under which you want to create an MA.
Destination
MAC Address
Enter the target device’s MAC address to which the VDSL Router performs a CFM loopback
test.
802.1Q VLAN
ID
Type a VLAN ID (0-4095) for this MA.
VDSL Traffic
Type
This shows whether the VDSL traffic is activated.
Loopback
Message (LBM)
This shows how many Loop Back Messages (LBMs) are sent and if there is any inorder or
outorder Loop Back Response (LBR) received from a remote MEP.
Linktrace
Message (LTM)
This shows the destination MAC address in the Link Trace Response (LTR).
Set MD Level
Click this button to configure the MD (Maintenance Domain) level.
Send Loopback
Click this button to have the selected MEP send the LBM (Loop Back Message) to a specified
remote end point.
Send Linktrace
Click this button to have the selected MEP send the LTMs (Link Trace Messages) to a
specified remote end point.
Page 202 / 240
Chapter 15 Diagnostic
Basic Home Station VDSL2 P8701T User’s Guide
202
Page 203 / 240
Basic Home Station VDSL2 P8701T User’s Guide
203
C
HAPTER
16
Settings
This chapter describes how to manage your VDSL Router’s configuration.
16.1
Backup Configuration Using the Web Configurator
Click
Wireless network > Classic configuration > Management > Settings > Backup
to
open the following screen. Use this screen to back up (save) the VDSL Router’s current
configuration to a file on your computer. Once your VDSL Router is configured and functioning
properly, it is highly recommended that you back up your configuration file before making
configuration changes. The backup configuration file will be useful in case you need to return to
your previous settings.
Figure 90
Settings: Backup
Click
Backup Settings
to save the VDSL Router’s current configuration to your computer.
16.2
Restore Configuration Using the Web Configurator
Click
Wireless network > Classic configuration > Management > Settings > Update
to open
the following screen. Use this screen to upload a new or previously saved configuration file from
your computer to your VDSL Router.
Figure 91
Settings: Update
Page 204 / 240
Chapter 16 Settings
Basic Home Station VDSL2 P8701T User’s Guide
204
Do not turn off the VDSL Router while configuration file upload is in
progress
You must then wait before logging into the VDSL Router again. The VDSL Router automatically
restarts causing a temporary network disconnect. In some operating systems, you may see the
following icon on your desktop.
Figure 92
Temporarily Disconnected
You may need to change the IP address of your computer to be in the same subnet as that of the
VDSL Router’s IP address (192.168.1.1). See the appendix for details on how to set up your
computer’s IP address.
16.3
Restoring Factory Defaults
Click
Management > Settings > Restore Default
to open the following screen.
Figure 93
Management > Settings > Restore Default
Click
Restore Default Settings
to clear all user-entered configuration information and return the
VDSL Router to its factory defaults.
You can also press the
RESET
button on the rear panel to reset the factory defaults of your VDSL
Router.
Table 74
Settings: Update
LABEL
DESCRIPTION
Settings File
Name
Type in the location of the file you want to upload in this field or click
Browse...
to
find it.
Browse...
Click
Browse...
to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Update
Settings
Click this to begin the upload process.
Page 205 / 240
Chapter 16 Settings
Basic Home Station VDSL2 P8701T User’s Guide
205
You may need to change the IP address of your computer to be in the same subnet as that of the
default VDSL Router IP address (192.168.1.1). See the appendix for details on how to set up your
computer’s IP address.
19216811.live