Page 36 / 404
Scroll up to view Page 31 - 35
Chapter 2 Introducing the Web Configurator
P-661HNU-Fx User’s Guide
36
Page 37 / 404
P-661HNU-Fx User’s Guide
37
C
HAPTER
3 1
Tutorials
3.1
Overview
This chapter contains the following tutorials:
•
Setting Up Your DSL Connection
•
How to Set up a Wireless Network
•
Setting Up NAT Port Forwarding
•
Using the File Sharing Feature
•
Using the Print Server Feature
•
Configuring the MAC Address Filter
•
Configuring Static Route for Routing to Another Network
•
Configuring QoS Queue and Class Setup
•
Access the ZyXEL Device Using DDNS
3.2
Setting Up Your DSL Connection
This tutorial shows you how to set up your Internet connection using the Web
Configurator.
If you connect to the Internet through a DSL connection, follow these steps and
use the information from your Internet Service Provider (ISP) to configure the
ZyXEL Device:
1
Connect the ZyXEL Device properly. Refer to the Quick Start Guide for details on
the ZyXEL Device’s hardware connections.
2
Connect one end of a DSL cable to the DSL port of your ZyXEL Device. The other
end should be connected to the DSL port in your house, the DSL/Modem jack on a
splitter or another DSL router/modem provided by your ISP.
Page 38 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
38
3
Connect one end of an Ethernet cable to one of the Ethernet ports on the ZyXEL
Device and the other end to the computer that you will use to browse or access
the web configurator.
4
Connect the ZyXEL Device to a power source, turn it on and wait for the POWER
LED to become a steady green. Turn on the modem provided by your ISP as well
as the computer.
Account Configuration
1
Click
Network Setting > Broadband
to open the screen shown below. Click
Add
new WAN Interface
.
2
For this example, the interface type is ADSL and the connection has the following
information.
General
Name
MyDSLConnection
Type
ADSL
Mode
Routing
WAN Service
Type
PPP over Ethernet (PPPoE)
ATM PVC Configuration
VPI/VCI
36/48
Encapsulation
Mode
LLC/SNAP-BRIDGING
Service
Category
UBR without PCR
PPP Information
PPP User Name
PPP Password
ABCDEF!
PPPoE Service
Name
My DSL
Authentication
Method
Auto
Page 39 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
39
Enter or select these values and click
Apply
.
This completes your DSL WAN connection setting.
Static IP
Address
Put a check on the option
Use Static IP Address
.
Use 192.168.1.32 as the IP Address
Others
PPPoE Passthrough: Disabled
NAT: Enabled
IGMP Multicast Proxy: Enabled
Apply as Default Gateway: Enable
DNS Server: Static DNS IP Address (Primary:
192.168.1.254 Secondary: 192.168.1.253)
Page 40 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
40
3
You should see a summary of your new DSL connection setup in the
Broadband
screen as follows.
Try to connect to a website, such as “www.zyxel.com” to see if you have correctly
set up your Internet connection. Be sure to contact your service provider for any
information you need to configure the WAN screens.
3.3
How to Set up a Wireless Network
This section gives you examples of how to set up an access point and a wireless
client using the ZyXEL Device. This allows you to connect the Internet wirelessly.
An access point (AP) or wireless router is referred to as the “AP”, and a computer
with a wireless network card or USB wireless adapter is referred to as the
“wireless client” here.
In the following diagram, the wireless client is labeled
C
and the access point is
labeled
AP
.
Wireless LAN Setup
Note: This section shows how to set up the wireless client using two methods: the
ZyXEL utility method and the WPS PIN method. Refer to the Quick Start Guide
if you wish to connect wirelessly using the Microsoft Windows utility or the WPS
button method (Push Button Configuration).
C
AP
19216811.live