Page 46 / 404
Scroll up to view Page 41 - 45
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
46
1
Open the ZyXEL utility and click the
Profile
tab to open the screen shown next.
Click
Add
to configure a new profile.
Tutorial: Profile
2
The
Add New Profile
screen appears. The wireless client automatically searches
for available wireless networks, and displays them in the
Scan Info
box. Click
Scan
if you want to search again. You can also configure your profile for a wireless
network that is not in the list.
Tutorial: Add New Profile
3
Give the profile a descriptive name (of up to 32 printable ASCII characters). Select
Infrastructure
and either manually enter or select the AP's SSID in the
Scan
Info
table and click
Select
.
Page 47 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
47
4
Choose the same encryption method as the AP to which you want to connect (In
this example, WPA-PSK).
Tutorial: Profile Security
5
This screen varies depending on the encryption method you selected in the
previous screen. Enter the pre-shared key and leave the encryption type at the
default setting.
Tutorial: Profile Encryption
6
In the next screen, leave both boxes selected.
Tutorial: Wirele
s Protocol Se tings.
Page 48 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
48
7
Verify the profile settings in the read-only screen. Click
Save
to save and go to the
next screen.
Tutorial: Confirm Save
8
Click
Activate Now
to use the new profile immediately. Otherwise, click the
Activate Later
button.
If you clicked
Activate Later
, you can select the profile from the list in the
Profile
screen and click
Connect
to activate it.
Note: Only one profile can be activated and used at any given time.
Tutorial: Activate
9
When you activate the new profile, the ZyXEL utility returns to the
Link Info
screen while it connects to the AP using your settings. When the wireless link is
established, the ZyXEL utility icon in the system tray turns green and the
Link
Info
screen displays details of the active connection.
10
Open your Internet browser, enter
or the URL of any other
web site in the address bar and press ENTER. If you are able to access the web
site, your new profile is successfully configured.
11
If you cannot access the Internet go back to the
Profile
screen, select the profile
you are using and click
Edit
. Check the details you entered previously. Also, refer
to the Troubleshooting section of this User's Guide or contact your network
administrator if necessary.
Page 49 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
49
3.3.4
Configuring the Wireless Client using the WPS PIN
number
This section describes how to connect the wireless client to a network using the
WPS PIN method. You need to log into the Web Configurator for this.
1
Place a WPS-enabled device that supports the WPS PIN configuration method near
the ZyXEL Device.
2
Log into the ZyXEL Device’s web configurator at
(see
Introducing the Web Configurator
on page
29
for more details on this).
3
In the navigation panel, click
Network Setting > Wireless >
WPS
.
4
Select the
Enable
check box and click
Apply
to enable the WPS function.
5
Enter the PIN of the other WPS-enabled device into the
Enter PIN here
text box
and click
Register
. You can locate this PIN number in the other device’s utility or
on the device itself. See the other device’s documentation if you cannot locate the
PIN
Page 50 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
50
6
Click
Start
or
Apply
in the other device’s utility screen within two minutes of
clicking
Register
in the ZyXEL Device web configurator screen.
7
The ZyXEL Device and the other WPS-enabled device establish a secure
connection. This can take up to two minutes.
8
Your computer is now ready to connect to the Internet wirelessly through your
ZyXEL Device.
Note: You must repeat this procedure for every device you want to add to your
network using WPS.
3.4
Setting Up NAT Port Forwarding
In this tutorial, you manage the Doom server on a computer behind the ZyXEL
Device. In order for players on the Internet (like
A
in the figure below) to
communicate with the Doom server, you need to configure the port settings and IP
address on the ZyXEL Device. Traffic should be forwarded to the port 666 of the
Doom server computer which has an IP address of 192.168.1.34.
Tutorial: NAT Port Forwarding Setup
You may set up the port settings by configuring the port settings for the Doom
server computer (see
Chapter 11 on page 190
for more information).
1
Click
Network
Setting
>
NAT
>
Port Forwarding
. Click
Add new rule
.
D
=192.168.1.34
WAN
LAN
port 666
A
19216811.live