1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-661HNU-F1
    5. /
  5. 11
Page 51 / 404 Scroll up to view Page 46 - 50
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
51
2
Enter the following values:
3
Click
Apply
.
4
The port forwarding settings you configured should appear in the table. Make sure
the
Status
check box for this rule is selected. Click
Apply
to have the ZyXEL
Device start forwarding port 666 traffic to the computer with IP address
192.168.1.34.
Players on the Internet then can have access to your Doom server.
Service Name
Select
User Defined
.
WAN Interface
Select the WAN interface through which the Doom service is
forwarded. This is the default interface for this example, which is
MyDSLConnection
.
Start/End Ports
666
Translation Start/End
Ports
666
Server IP Address
Enter the IP address of the Doom server. This is
192.168.1.34
for this example.
Protocol
Select
TCP/UDP
. This should be the protocol supported by the
Doom server.
Page 52 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
52
3.5
Using the File Sharing Feature
In this section you can:
•
Set up file sharing of your USB device from the ZyXEL Device
•
Access the shared files of your USB device from a computer
3.5.1
Set Up File Sharing
To set up file sharing you need to connect your USB device, enable file sharing and
set up your share(s).
3.5.1.1
Activate File Sharing
1
Connect your USB device to the USB port at the back panel of the ZyXEL Device.
2
Click
Network Setting > Home Networking > File Sharing
. Select
Enable
and click
Apply
to activate the file sharing function. The ZyXEL Device
automatically adds your USB device to the
Share Directory List
.
3.5.1.2
Set up File Sharing on Your ZyXEL Device
You also need to set up file sharing on your ZyXEL Device in order to share files.
1
Click
Add new share
in the
File Sharing
screen. Select your USB device from
the
Volume
drop-down list box.
Page 53 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
53
2
Click
Browse
to browse through all the files on your USB device. Select the folder
that you want to add as a share. In this example, select
Bob’s_Share
. Click
Apply
.
Note: Select the first option on this list to include all files and folders on the USB
device.
3
You can add a description for the share or leave it blank. The
Add Share
Directory
screen should look like the following. Leave the
Access Level
as
Public
to allow anyone connected to the ZyXEL Device to access the share.
Tutorial: USB Services > File Sharing > Share Configuration
4
Set the
Access
Level
to
Security
if you wish to restrict access to the share for
certain users. If you select this option, the screen should look like the following.
Note: You need to create users before using this feature - see step 8.
Page 54 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
54
5
Click on a user from the list
Available Users
6
Click on the arrows between the
Available Users
and
Allow Users
boxes to
grant or deny access to the specific share that you are adding. If you set the
Access Level
to
Security
, only users listed under
Allow Users
can access the
share.
7
Click
Apply
to finish.
8
If you wish to create users and grant them access to specific shares, click
Add
New User
in the
File Sharing
screen.
9
Enter a user name. A user name can be any combination of letters and numbers.
It must be between 5 and 15 characters long. This examples uses
Clarissa
as the
username.
10
Enter the password that this user name must type when accessing the share.
Retype it in the field below for confirmation. A password can be any combination
of letters and numbers. It is case sensitive and it must be between 5 and 15
characters long.
11
This sets up the file sharing server. You can see the USB storage device listed in
the table below.
Tutorial: USB Services > File Sharing > Share Configuration (2)
Page 55 / 404
Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
55
3.5.2
Access Your Shared Files From a Computer
You can use Windows Explorer to access the file storage devices connected to the
ZyXEL Device.
Note: The examples in this User’s Guide show you how to use Microsoft’s Windows
XP to browse your shared files. Refer to your operating system’s
documentation for how to browse your file structure.
1
Open Windows Explorer to access Bob’s Share using Windows Explorer browser.
2
In Windows Explorer’s Address bar type a double backslash “\\” followed by the IP
address of the ZyXEL Device (the default IP address of the ZyXEL Device is
192.168.1.1) and press [ENTER]. The share folder
Bob’s_Share
is available.
File Sharing via Windows Explorer
Once you access
Bob’s_Share
via your ZyXEL Device, you do not have to relogin
unless you restart your computer.
3.6
Using the Print Server Feature
In this section you can:
•
Configure a TCP/IP Printer Port
•
Add a New Printer Using Windows
•
Add a New Printer Using Macintosh OS X
Configure a TCP/IP Printer Port
This example shows how you can configure a TCP/IP printer port. This example is
done using the Windows 2000 Professional operating system. Some menu items
may look different on your operating system. The TCP/IP port must be configured
with the IP address of the ZyXEL Device and must use the LPR protocol to
communicate with the printer. Consult your operating systems documentation for
instructions on how to do this or follow the instructions below if you have a
Windows 2000/XP operating system.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top