Page 251 / 324
Scroll up to view Page 246 - 250
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
251
Windows 2000/NT/XP
The following example figures use the default Windows XP GUI theme.
1
Click
start
(
Start
in Windows 2000/NT),
Settings
,
Control Panel
.
Figure 118
Windows XP: Start Menu
2
In the
Control Panel
, double-click
Network Connections
(
Network and Dial-
up Connections
in Windows 2000/NT).
Figure 119
Windows XP: Control Panel
Page 252 / 324
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
252
3
Right-click
Local Area Connection
and then click
Properties
.
Figure 120
Windows XP: Control Panel: Network Connections: Properties
4
Select
Internet Protocol (TCP/IP)
(under the
General
tab in Win XP) and then
click
Properties
.
Figure 121
Windows XP: Local Area Connection Properties
5
The
Internet Protocol TCP/IP Properties
window opens (the
General tab
in
Windows XP).
Page 253 / 324
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
253
• If you have a dynamic IP address click
Obtain an IP address
automatically
.
•
If you have a static IP address click
Use the following IP Address
and fill in
the
IP address
,
Subnet mask
, and
Default gateway
fields.
• Click
Advanced
.
Figure 122
Windows XP: Internet Protocol (TCP/IP) Properties
6
If you do not know your gateway's IP address, remove any previously installed
gateways in the
IP Settings
tab and click
OK
.
Do one or more of the following if you want to configure additional IP addresses:
• In the
IP Settings
tab, in IP addresses, click
Add
.
• In
TCP/IP Address
, type an IP address in
IP address
and a subnet mask in
Subnet mask
, and then click
Add
.
• Repeat the above two steps for each IP address you want to add.
• Configure additional default gateways in the
IP Settings
tab by clicking
Add
in
Default gateways
.
• In
TCP/IP Gateway Address
, type the IP address of the default gateway in
Gateway
. To manually configure a default metric (the number of transmission
hops), clear the
Automatic metric
check box and type a metric in
Metric
.
• Click
Add
.
• Repeat the previous three steps for each default gateway you want to add.
Page 254 / 324
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
254
• Click
OK
when finished.
Figure 123
Windows XP: Advanced TCP/IP Properties
7
In the
Internet Protocol TCP/IP Properties
window (the
General
tab in
Windows XP):
• Click
Obtain DNS server address automatically
if you do not know your
DNS server IP address(es).
• If you know your DNS server IP address(es), click
Use the following DNS
server addresses
, and type them in the
Preferred DNS
server
and
Alternate DNS server
fields.
Page 255 / 324
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
255
If you have previously configured DNS servers, click
Advanced
and then the
DNS
tab to order them.
Figure 124
Windows XP: Internet Protocol (TCP/IP) Properties
8
Click
OK
to close the
Internet Protocol (TCP/IP) Properties
window.
9
Click
Close
(
OK
in Windows 2000/NT) to close the
Local Area Connection
Properties
window.
10
Close the
Network Connections
window (
Network and Dial-up Connections
in Windows 2000/NT).
11
Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
1
Click
Start
,
All Programs
,
Accessories
and then
Command Prompt
.
2
In the
Command Prompt
window, type "ipconfig" and then press [ENTER]. You
can also open
Network Connections
, right-click a network connection, click
Status
and then click the
Support
tab.
Windows Vista
This section shows screens from Windows Vista Enterprise Version 6.0.
19216811.live