Page 261 / 324
Scroll up to view Page 256 - 260
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
261
If you have previously configured DNS servers, click
Advanced
and then the
DNS
tab to order them.
Figure 133
Windows Vista: Internet Protocol Version 4 (TCP/IPv4) Properties
10
Click
OK
to close the
Internet Protocol Version 4 (TCP/IPv4) Properties
window.
11
Click
Close
to close the
Local Area Connection Properties
window.
12
Close the
Network Connections
window.
13
Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
1
Click
Start
,
All Programs
,
Accessories
and then
Command Prompt
.
2
In the
Command Prompt
window, type "ipconfig" and then press [ENTER]. You
can also open
Network Connections
, right-click a network connection, click
Status
and then click the
Support
tab.
Page 262 / 324
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
262
Macintosh OS 8/9
1
Click the
Apple
menu,
Control Panel
and double-click
TCP/IP
to open the
TCP/
IP Control Panel
.
Figure 134
Macintosh OS 8/9: Apple Menu
Page 263 / 324
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
263
2
Select
Ethernet built-in
from the
Connect via
list.
Figure 135
Macintosh OS 8/9: TCP/IP
3
For dynamically assigned settings, select
Using DHCP Server
from the
Configure:
list.
4
For statically assigned settings, do the following:
• From the
Configure
box, select
Manually
.
• Type your IP address in the
IP Address
box.
• Type your subnet mask in the
Subnet mask
box.
• Type the IP address of your ZyXEL Device in the
Router address
box.
5
Close the
TCP/IP Control Panel
.
6
Click
Save
if prompted, to save changes to your configuration.
7
Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the
TCP/IP Control Panel
window.
Page 264 / 324
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
264
Macintosh OS X
1
Click the
Apple
menu, and click
System Preferences
to open the
System
Preferences
window.
Figure 136
Macintosh OS X: Apple Menu
2
Click
Network
in the icon bar.
• Select
Automatic
from the
Location
list.
• Select
Built-in Ethernet
from the
Show
list.
• Click the
TCP/IP
tab.
3
For dynamically assigned settings, select
Using DHCP
from the
Configure
list.
Figure 137
Macintosh OS X: Network
4
For statically assigned settings, do the following:
Page 265 / 324
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
265
• From the
Configure
box, select
Manually
.
• Type your IP address in the
IP Address
box.
• Type your subnet mask in the
Subnet mask
box.
• Type the IP address of your ZyXEL Device in the
Router address
box.
5
Click
Apply Now
and close the window.
6
Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the
Network
window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red
Hat Linux 9.0. Procedure, screens and file location may vary depending on your
Linux distribution and release version.
Note: Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1
Click the Red Hat button (located on the bottom left corner), select
System
Setting
and click
Network
.
Figure 138
Red Hat 9.0: KDE: Network Configuration: Devices
19216811.live