Page 221 / 421
Scroll up to view Page 216 - 220
Chapter 14 802.1Q/1P
P-660HN-FxZ Series User’s Guide
218
Figure 128
Advanced > 802.1Q/1P > Port Setting: Example
Ports 3 and 4 are connected to desktop computers and are used for Internet traffic. You want to
create low priority for this type of traffic, so you want to group these ports and PVC2 into one
VLAN (VLAN3). PVC2 priority is set to low level of service.
SSID1 and SSID2 are two wireless networks. You want to create medium priority for this type
of traffic, so you want to group these ports and PVC3 into one VLAN (VLAN4). PVC3
priority is set to medium level of service.
Follow the same steps as in VLAN2 to configure the settings for VLAN3 and VLAN4. The
summary screen should then display as follows.
Page 222 / 421
Chapter 14 802.1Q/1P
P-660HN-FxZ Series User’s Guide
219
Figure 129
Advanced > 802.1Q/1P > Group Setting: Example
This completes the 802.1Q/1P setup.
14.2
The 802.1Q/1P Group Setting Screen
Use this screen to activate 802.1Q/1P and display the VLAN groups. Click
Advanced >
802.1Q/1P
to display the following screen.
Page 223 / 421
Chapter 14 802.1Q/1P
P-660HN-FxZ Series User’s Guide
220
Figure 130
Advanced > 802.1Q/1P > Group Setting
The following table describes the labels in this screen.
Table 80
Advanced > 802.1Q/1P > Group Setting
LABEL
DESCRIPTION
802.1P/1Q
Active
Select this check box to activate the 802.1P/1Q feature.
Management Vlan
ID
Enter the ID number of a VLAN group. All interfaces (ports, SSIDs and PVCs)
are in the management VLAN by default. If you disable the management VLAN,
you will not be able to access the ZyXEL Device.
Summary
#
This field displays the index number of the VLAN group.
Name
This field displays the name of the VLAN group.
VID
This field displays the ID number of the VLAN group.
Port Number
These columns display the VLAN’s settings for each port. A tagged port is
marked as
T
, an untagged port is marked as
U
and ports not participating in a
VLAN are marked as “
–
“.
Modify
Click the
Edit
button to configure the ports in the VLAN group.
Click the
Remove
button to delete the VLAN group.
Page 224 / 421
Chapter 14 802.1Q/1P
P-660HN-FxZ Series User’s Guide
221
14.2.1
Editing 802.1Q/1P Group Setting
Use this screen to configure the settings for each VLAN group.
In the
802.1Q/1P
screen, click the
Edit
button from the
Modify
filed to display the following
screen.
Figure 131
Advanced > 802.1Q/1P > Group Setting > Edit
The following table describes the labels in this screen.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Table 80
Advanced > 802.1Q/1P > Group Setting (continued)
LABEL
DESCRIPTION
Table 81
Advanced > 802.1Q/1P > Group Setting > Edit
LABEL
DESCRIPTION
Name
Enter a descriptive name for the VLAN group for identification purposes. The text
may consist of up to 8 letters, numerals, “-”, “_” and “@”.
VLAN ID
Assign a VLAN ID for the VLAN group. The valid VID range is between 1 and 4094.
Default Gateway
Select the default gateway for the VLAN group.
Ports
This field displays the types of ports available to join the VLAN group.
Control
Select
Fixed
for the port to be a permanent member of the VLAN group.
Select
Forbidden
if you want to prohibit the port from joining the VLAN group.
Page 225 / 421
Chapter 14 802.1Q/1P
P-660HN-FxZ Series User’s Guide
222
14.3
The 802.1Q/1P Port Setting Screen
Use this screen to configure the PVID and assign traffic priority for each port. Click
Advanced
>
802.1Q/1P
>
Port Setting
to display the following screen.
Figure 132
Advanced > 802.1Q/1P > Port Setting
The following table describes the labels in this screen.
Tx Tag
Select
Tx Tagging
if you want the port to tag all outgoing traffic trasmitted through
this VLAN. You select this if you want to create VLANs across different devices and
not just the ZyXEL Device.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Table 81
Advanced > 802.1Q/1P > Group Setting > Edit (continued)
LABEL
DESCRIPTION
Table 82
Advanced > 802.1Q/1P > Port Setting
LABEL
DESCRIPTION
Ports
This field displays the types of ports available to join the VLAN group.
802.1Q PVID
Assign a VLAN ID for the port. The valid VID range is between 1 and 4094. The
ZyXEL Device assigns the PVID to untagged frames or priority-tagged frames
received on this port.
19216811.live