Zyxel P-2602HWT-F3 Router Manual PDF (Setup & Configuration Guide)

Page 21 / 46 Scroll up to view Page 16 - 20

Prestige 2602HW Series Quick Start Guide

21

Figure 8 Internet Connection with PPPoE

If your ISP provides the name of

your PPPoE service provider,

enter it in the

Service Name

field.

Enter the user name and

password

exactly

as your ISP

assigned them.

Select

Obtain an IP Address

Automatically

if you have a

dynamic IP address; otherwise

select

Static IP Address

and

type your ISP assigned IP

address in the text box below.

Select

Connect on Demand

when you don't want the

connection up all the time and

specify an idle time-out period (in

seconds) in the

Max. Idle

Timeout

field.

Select

Nailed-Up Connection

when you want your connection up all the time. The

Prestige will try to bring up the connection automatically if it is disconnected

From the

Network Address Translation

drop-down list box, select

SUA Only

,

Full

Feature

or

None

. Refer to the

Network Address Translation

section for more information.

Figure 9 Internet Connection with RFC 1483

Enter the IP address given by

your ISP in the

IP Address

field.

The

IP Address

field is not

available for

bridge mode.

Refer to

Figure 8

for description

of the

Network Address

Translation

field.

Page 22 / 46

Prestige 2602HW Series Quick Start Guide

22

Figure 10 Internet Connection with ENET

ENCAP

In the

ENET ENCAP

Gateway

field, enter the

gateway IP address given

by your ISP.

Refer to

Figure 8

for other

field descriptions

.

Figure 11 Internet Connection with PPPoA

Refer to

Figure 8

for field

descriptions.

The

IP Address

and

Network

Address

Translation

fields

are

not

available

for bridge mode.

3.

Use this screen to configure the voice settings (for the Prestige’s SIP account one)

with the information in the

Voice Account Information

table.

Page 23 / 46

Prestige 2602HW Series Quick Start Guide

23

Your VoIP service provider may automatically configure VoIP

settings when the Prestige connects to the Internet. If so, you

only need to configure the authentication user ID and password

in this screen.

A SIP account's Uniform Resource Identifier (URI) identifies the SIP account in a way

similar to the way an e-mail address identifies an e-mail account. It is also known as a

SIP identity or address. The format of a SIP identity is SIP-Number@SIP-Service-

Domain.

A SIP number is the part of the SIP URI that comes before the "@" symbol. For

example, if

[email protected]

was your SIP URI, “1122334455” would

be your SIP number.

A SIP service domain is the domain name that comes after the @ symbol in a SIP URI.

For example, if

[email protected]

was your SIP URI, “VoIP-

provider.com” is the SIP service domain.

Figure 12 Voice Configuration

Enter the SIP service domain name.

In the

User ID

and

Password

fields, type the username

and associated password exactly as they were given to

you.

Enter your SIP number in the

SIP Number

field.

If you were given a

SIP

Local Port

number, enter it;

otherwise leave it set to the

default.

Type the IP address of the

VoIP service provider’s SIP

server in the

SIP Server

Address

field. If you were

given a

SIP Server Port

number, enter it; otherwise

leave it set to the default.

If your VoIP service provider

gave you a registrar server

address and port, enter them

in the

REGISTER Server

Address

and

REGISTER

Server Port

fields. If not,

enter the address and port

from the

SIP Server

Address

and

SIP Server

Port

fields again here.

Page 24 / 46

Prestige 2602HW Series Quick Start Guide

24

Select

Send Caller ID

to show identification information when you make VoIP calls.

Phone 1

and

Phone 2

correspond to the Prestige’s physical

PHONE 1

and

2

ports,

respectively. Select whether you want to apply this SIP account to

Phone 1

,

Phone 2

or

both. If you later apply another SIP account to both phones, you will not know which SIP

account you are using when you place a call.

4.

Verify the settings in the screen shown next. To change the LAN information on the

Prestige, click

Change LAN Configurations

. Otherwise click

Save Settings

to

save the configuration and skip to step 6.

Figure 13 Wizard Screen 4

5.

If you want to change your Prestige LAN settings, click

Change LAN

Configuration

to display the screen as shown next.

Page 25 / 46

Prestige 2602HW Series Quick Start Guide

25

Figure 14 Wizard: LAN Configuration

Enter the IP address of your Prestige

in dotted decimal notation in the

LAN

IP Address

field. For example,

192.168.1.1 (factory default).

If you change the

Prestige’s LAN IP

address, you must

use the

new

IP

address if you want to

access the web

configurator again.

Enter a subnet mask in dotted decimal

notation in the

LAN Subnet Mask

field.

From the

DHCP Server

drop-down list box, select

On

to allow your Prestige to assign IP

addresses, an IP default gateway and DNS servers to computer systems that support the

DHCP client. Select

Off

to disable DHCP server.

When DHCP server is used, set the following items:

Specify the first of the contiguous addresses in the IP address pool in the

Client IP Pool

Starting Address

field.

Specify the size or count of the IP address pool in the

Size of Client IP Pool

field.

Enter the IP address(es) of the DNS server(s) in the

Primary DNS Server

and/or

Secondary DNS Server

fields.

6.

The Prestige automatically tests the connection to the computer(s) connected to the

LAN ports. To test the connection from the Prestige to the ISP and the registrations

of your SIP account, click

Start Diagnose

. Otherwise click

Return to Main

Menu

to go back to the

Site Map

screen.

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share