Page 6 / 46 Scroll up to view Page 1 - 5
Prestige 2602HW Series Quick Start Guide
6
Figure 1 Rear Panel Hardware Connections
Table 1 Rear Panel Description
LABEL
DESCRIPTION
1.
DSL
Connect to a telephone jack using the included telephone wire.
2.
LAN 1..4
Connect to a computer/external hub using an Ethernet cable.
3.
PHONE
1~2
Connect analog telephones to these ports using telephone wire.
These are also known as FXS (Foreign Exchange Station) ports.
4.
POWER
18V DC
Connect to a power source using only the included power adaptor for
your region (see your
User’s Guide
).
After you’ve made the connections, connect the power adaptor to a power supply and
push in the power button to turn on the Prestige.
The
PWR/SYS
LED blinks while performing system testing and then turns steady on if
the testing is successful.
A
LAN
LED turns on if a LAN port is properly connected.
Page 7 / 46
Prestige 2602HW Series Quick Start Guide
7
Table 1 Rear Panel Description
LABEL
DESCRIPTION
CONSOLE
Only connect this port if you want to configure the Prestige using the
SMT via console port see your User's Guide for details.
Use the console port for local device configuration and management.
Connect one end of the console cable to the console port of the
Prestige and the other end to a serial port (COM1, COM2 or other
COM port) on your computer. Your computer should have a terminal
emulation communications program (such as HyperTerminal) set to
VT100 terminal emulation, no parity, 8 data bits, 1 stop bit, no flow
control and 9600 bps port speed.
RESET
You only need to use this button if you’ve forgotten the Prestige’s
password. It returns the Prestige to the factory defaults (password is
1234, LAN IP address 192.168.1.1 etc.; see your
User’s Guide
for
details).
2.3 Prestige 2602HWL
Use both VoIP and regular phone services with the Prestige 2602HWL’s lifeline feature.
Make and receive regular phone calls while someone else connected to the Prestige is
making VoIP calls.
Page 8 / 46
Prestige 2602HW Series Quick Start Guide
8
Figure 2 Prestige 2602HWL Phone and DSL Connections
The
DSL
port handles both the ADSL and regular telephone service connections. The
phone line port is also known as an FXO (Foreign Exchange Office) port.
1.
The P2602HWL includes a v-shaped cable with one black wire and one gray wire.
Connect the end where the wires join to the P2602HWL’s
DSL
port.
2.
Connect the black wire to the “modem” jack on a telephone or ISDN splitter (not
included).
3.
Connect the gray wire to the splitter’s “phone” jack or a telephone wall jack.
"
If you are using T-ISDN (UR-2), connect the gray wire to the (included) UR-
2 to TAE connector before connecting it to the telephone splitter’s “phone”
jack or a telephone wall jack.
4.
Connect the splitter’s “line” jack to a telephone (or ISDN) wall jack.
Page 9 / 46
Prestige 2602HW Series Quick Start Guide
9
2.4 Front Panel LEDs
Figure 3 Front Panel
Table 2 Front Panel LED Descriptions
LED
COLOR
STATUS
DESCRIPTION
On
The Prestige is receiving power and
functioning properly.
Green
Blinking
The Prestige is rebooting.
On
Power to the Prestige is too low.
Red
Blinking
The Prestige is receiving power but not
functioning properly.
PWR/ SYS
Off
The system is not ready or has
malfunctioned.
Page 10 / 46
Prestige 2602HW Series Quick Start Guide
10
Table 2 Front Panel LED Descriptions
LED
COLOR
STATUS
DESCRIPTION
On
Successful 10Mb Ethernet connection.
Green
Blinking
The Prestige is sending/receiving data.
On
The Prestige has a successful 100Mb
Ethernet connection.
Amber
Blinking
The Prestige is sending/receiving data.
LAN 1.. 4
Off
The LAN is not connected.
On
The Prestige is ready, but not sending/
receiving data through the wireless LAN.
Green
Blinking
The Prestige is sending/receiving data
through the wireless LAN.
WLAN
Off
The wireless LAN is not ready or has failed.
Fast Blinking
The Prestige is sending/receiving non-PPP
data.
Slow Blinking
The Prestige is initializing the DSL line.
Green
On
The DSL link is up.
On
The connection to the PPPoE server is up.
Amber
Blinking
The Prestige is sending/receiving PPP data.
DSL/ PPP
Off
The DSL link is down.
VoIP
Green
On
The VoIP SIP registration is OK.
Blinking
The Prestige is sending/receiving VoIP traffic.
Off
The VoIP SIP registration failed.
Green
On
The telephone(s) connected to this port is
(are) in use.
Phone 1-2
Blinking
The telephone(s) connected to this port is
(are) ringing.
Off
The telephone(s) connected to this port is
(are) not in use.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top