Page 16 / 46 Scroll up to view Page 11 - 15
Prestige 2602HW Series Quick Start Guide
16
4.3 Checking/Updating Your Computer’s IP Address
1.
In the computer, click
Start
, (
All) Programs
,
Accessories
and then
Command
Prompt
.
2.
In the
Command Prompt
window, type "ipconfig" and then press
ENTER
to verify
that your computer’s IP address is in the correct range (192.168.1.2 to
192.168.1.254) with subnet mask 255.255.255.0. This is necessary in order to
communicate with the Prestige.
Refer to your
User’s Guide
for detailed IP address configuration for other Windows and
Macintosh computer operating systems.
4.4 Testing the Connection to the Prestige
1.
Click
Start
, (
All
)
Programs
,
Accessories
and then
Command Prompt
.
2.
In the
Command Prompt
window, type "ping” followed by a space and the IP
address of the Prestige (192.168.1.1 is the default).
3.
Press
ENTER
and the following screen displays.
Page 17 / 46
Prestige 2602HW Series Quick Start Guide
17
Your computer can now communicate with the Prestige using the
LAN
port.
5
Configuring Your Prestige
The web configurator is an HTML-based management interface that allows easy
Prestige setup and management via Internet browser. Use Internet Explorer 6.0 and later
or Netscape Navigator 7.0 and later versions with JavaScript enabled. Recommended
screen resolution is 1024 by 768 pixels.
This
Quick Start Guide shows
you how to use the web
configurator only. See your
User’s Guide
for background
information on all Prestige features and SMT (System
Management Terminal) configuration.
5.1 Accessing Your Prestige Via Web Configurator
Even though you can connect to the Prestige wirelessly, it is
recommended that you connect your computer to a LAN port for
initial configuration.
1.
Launch your web browser. Enter “192.168.1.1” as the web site address.
Web site address
C:\>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=10ms TTL=254
Reply from 192.168.1.1: bytes=32 time<10ms TTL=254
Reply from 192.168.1.1: bytes=32 time<10ms TTL=254
Reply from 192.168.1.1: bytes=32 time<10ms TTL=254
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum =
10ms, Average =
2ms
Page 18 / 46
Prestige 2602HW Series Quick Start Guide
18
Figure 4 Entering Prestige LAN IP Address in Internet Explorer
2.
An
Enter Network Password
window displays. Enter the user name (“admin” is
the default), password (“1234” is the default). Click
Login
to proceed to a screen
asking you to change your password. Click
Reset
to revert to the default password
in the password field
Figure 5 Web Configurator: Password Screen
3.
It is highly recommended you change the default password! Enter a new password,
retype it to confirm and click
Apply
; alternatively click
Ignore
to proceed to the
main menu if you do not want to change the password now.
4.
You should now see the web configurator
Site Map
screen.
¾
Click
Wizard Setup
to begin a series of screens to configure your Prestige for
the first time.
¾
Click a link under
Advanced Setup
to configure advanced Prestige features.
¾
Click a link under
Maintenance
to see Prestige performance statistics, upload
firmware and back up, restore or upload a configuration file.
Default password.
Page 19 / 46
Prestige 2602HW Series Quick Start Guide
19
¾
Click
Logout
in the navigation panel when you have finished a Prestige
management session.
Figure 6 Web Configurator: Site Map Screen
The Prestige automatically logs you out if the management
session is idle for five minutes. Log back in if this happens.
5.2 Common Screen Command Buttons
This table shows common command buttons found on many web configurator screens.
Back
Click
Back
to return to the previous screen.
Apply
Click
Apply
to save your changes back to the Prestige.
Reset/Cancel
Click
Reset
or
Cancel
to begin configuring this screen afresh.
5.3 Using the Wizard for Initial Configuration
Use the Wizard Setup screens to configure the Prestige’s Internet access and VoIP
settings with information from
1.1 Required Information
. Your ISP may have already
configured some of the fields in the wizard screens for you.
1.
In the
Site Map
screen, click
Wizard Setup
to display the first wizard screen.
WIZARD
Navigation panel
LOGOUT
Page 20 / 46
Prestige 2602HW Series Quick Start Guide
20
Figure 7 Wizard Screen 1
From the
Mode
drop-down list box, select
Routing
(default) if your ISP allows
multiple computers to share an Internet
account. Otherwise select
Bridge
.
Select the encapsulation type your ISP
uses from the
Encapsulation
drop-down
list box. Choices vary depending on what
you select in the
Mode
field.
Select the multiplexing method used by
your ISP from the
Multiplex
drop-down
list box.
Enter the correct Virtual Path Identifier
(VPI) and Virtual Channel Identifier (VCI)
numbers supplied by your ISP in the
VPI
and
VCI
fields. These fields may already
be configured.
Click
Next
.
2.
The second wizard screen varies depending on what mode and encapsulation type
you use. All screens shown are with routing mode. Configure the fields and click
Next
to continue.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top