1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-2601HN-F1
    5. /
  5. 47
Page 231 / 344 Scroll up to view Page 226 - 230
Chapter 26 Backup/Restore
P-2601HN(L)-F1 Series User’s Guide
231
Reset to Factory Defaults
Click the
Reset
button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 113
Reset Warning Message
Figure 114
Reset In Process Message
You can also press the
RESET
button on the rear panel to reset the factory
defaults of your ZyXEL Device. Refer to
Section 1.6 on page 25
for more
information on the
RESET
button.
26.3
The Reboot Screen
System restart allows you to reboot the ZyXEL Device remotely without turning
the power off. You may need to do this if the ZyXEL Device hangs, for example.
Click
Maintenance > Reboot
. Click the
Reboot
button to have the ZyXEL Device
reboot. This does not affect the ZyXEL Device's configuration.
Page 232 / 344
Chapter 26 Backup/Restore
P-2601HN(L)-F1 Series User’s Guide
232
Page 233 / 344
P-2601HN(L)-F1 Series User’s Guide
233
C
HAPTER
27
Diagnostic
27.1
Overview
You can use different diagnostic methods to test a connection and see the detailed
information. These read-only screens display information to help you identify
problems with the ZyXEL Device.
27.1.1
What You Can Do in this Chapter
•
Use the
Ping
screen to ping an IP address and see the ping statistics (
Section
27.2 on page 233
).
•
Use the
DSL Line
screen
to check or reset your DSL connection (
Section 27.3
on page 234
).
27.2
The Ping Screen
Use this screen to ping an IP address. Click
Maintenance > Diagnostic
to open
the
Ping
screen shown next.
Figure 115
Maintenance > Diagnostic > Ping
Page 234 / 344
Chapter 27 Diagnostic
P-2601HN(L)-F1 Series User’s Guide
234
The following table describes the fields in this screen.
27.3
The DSL Line Screen
Click
Maintenance > Diagnostic > DSL Line
to open the screen shown next.
Figure 116
Maintenance > Diagnostic > DSL Line
Table 72
Maintenance > Diagnostic > Ping
LABEL
DESCRIPTION
Ping
Type the IP address of a computer that you want to ping in order to test a
connection. Click
Ping
and the ping statistics will show in the diagnostic .
Page 235 / 344
Chapter 27 Diagnostic
P-2601HN(L)-F1 Series User’s Guide
235
The following table describes the fields in this screen.
Table 73
Maintenance > Diagnostic > DSL Line
ITEM
DESCRIPTION
ATM
Status
Click this button to view your DSL connection’s Asynchronous Transfer Mode
(ATM) statistics. ATM is a networking technology that provides high-speed
data transfer. ATM uses fixed-size packets of information called cells. With
ATM, a high QoS (Quality of Service) can be guaranteed.
The (Segmentation and Reassembly) SAR driver translates packets into ATM
cells. It also receives ATM cells and reassembles them into packets.
These counters are set back to zero whenever the device starts up.
inPkts
is the number of good ATM cells that have been received.
inDiscards
is the number of received ATM cells that were rejected.
outPkts
is the number of ATM cells that have been sent.
outDiscards
is the number of ATM cells sent that were rejected.
ATM
Loopback
Test
Click this button to start the ATM loopback test. Make sure you have
configured at least one PVC with proper VPIs/VCIs before you begin this test.
The ZyXEL Device sends an OAM F5 packet to the DSLAM/ATM switch and
then returns it (loops it back) to the ZyXEL Device. The ATM loopback test is
useful for troubleshooting problems with the DSLAM and ATM network.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top