Page 46 / 344
Scroll up to view Page 41 - 45
Chapter 3 Tutorials
P-2601HN(L)-F1 Series User’s Guide
46
1
Click
Network
Setting
>
NAT
>
Port Forwarding
. Click
Add new rule
.
2
Enter the following values:
3
Click
Apply
.
4
The port forwarding settings you configured should appear in the table. Make sure
the
Status
check box for this rule is selected. Click
Apply
to have the ZyXEL
Device start forwarding port 666 traffic to the computer with IP address
192.168.1.34.
Players on the Internet then can have access to your Doom server.
Service Name
Select
User Defined
.
WAN Interface
Select the WAN interface through which the Doom service is
forwarded. This is the default interface for this example, which is
MyDSLConnection
.
Start/End Ports
666
Translation Start/End
Ports
666
Server IP Address
Enter the IP address of the Doom server. This is
192.168.1.34
for this example.
Protocol
Select
TCP/UDP
. This should be the protocol supported by the
Doom server.
Page 47 / 344
Chapter 3 Tutorials
P-2601HN(L)-F1 Series User’s Guide
47
3.5
How to Make a VoIP Call
You can register a SIP account with the SIP server and make voice calls over the
Internet to another VoIP device.
The following parameters are used in this example:
3.5.1
VoIP Calls With a Registered SIP Account
To use a registered SIP account, you should configure the SIP service provider and
applied for a SIP account.
3.5.1.1
SIP Service Provider Configuration
Follow the steps below to configure your SIP service provider.
1
Make sure your ZyXEL Device is connected to the Internet.
2
Open the web configurator.
3
Click
VoIP > SIP
to open the
SIP Service Provider
screen. Select
Add New
from the
Service Provider Selection
drop-down list box.
4
Select the
Enable
check box of
SIP Service Provider
and enter the
SIP Service
Provider Name
.
SIP Service Provider Name
ServiceProvider1
SIP Account Number
12345678
Username
ChangeMe
Password
ThisIsMySIP
Page 48 / 344
Chapter 3 Tutorials
P-2601HN(L)-F1 Series User’s Guide
48
5
Go to the
SIP Account
screen, click the
Edit
icon of
SIP 3
.
6
Select the
Active SIP Account
check box, then enter the
SIP Account Number
,
Username
, and
Password
. Leave other settings as default.
7
Click
Apply
to save your settings.
3.5.1.2
SIP Account Registration
Follow the steps below to register and activate your SIP account.
1
Click
Connection Status > System Info
to check if your SIP account has been
registered successfully. If the status is
Not Registered
, check your Internet
connection and click
Register
to register your SIP account.
Tutorial: Registration Status
Page 49 / 344
Chapter 3 Tutorials
P-2601HN(L)-F1 Series User’s Guide
49
3.5.1.3
Analog Phone Configuration
1
Click
VoIP > Phone
to open the
Phone Device
screen. Click the
Edit
icon next
to
Analog Phone 1
to configure the first phone port.
2
Select
SIP 3
from the
SIP Account
in the
SIP Account to Make Outgoing Call
section to have the phone (connected to the first phone port) use the registered
SIP 3 account to make outgoing calls.
3
Select the
SIP 3
check box in the
SIP Account(s) to Receive Incoming Call
section to have the phone (connected to the first phone port) receive phone calls
for the SIP 3 account.
4
Click
Apply
to save your changes.
Tutorial: VoIP > Phone
3.5.1.4
Making a VoIP Call
1
Make sure you connect a telephone to the first phone port on the ZyXEL Device.
2
Make sure the ZyXEL Device is on and connected to the Internet.
3
Pick up the phone receiver.
4
Dial the VoIP phone number you want to call.
Page 50 / 344
Chapter 3 Tutorials
P-2601HN(L)-F1 Series User’s Guide
50
3.6
Configuring the MAC Address Filter
Thomas noticed that his daughter Josephine spends too much time surfing the
web and downloading media files. He decided to prevent Josephine from accessing
the Internet so that she can concentrate on preparing for her final exams.
Josephine’s computer connects wirelessly to the Internet through the ZyXEL
Device. Thomas decides to use the
Security > MAC Filter
screen to grant
wireless network access to his computer but not to Josephine’s computer.
1
Click
Security
>
MAC Filter
to open the
MAC Filter
screen. Select the
Enable
check box to activate MAC filter function.
2
Find the MAC address of Thomas’ computer in this screen. Select
Allow
. Click
Apply
.
Thomas can also grant access to the computers of other members of his family
and friends. However, Josephine and others not listed in this screen will no longer
be able to access the Internet through the ZyXEL Device.
Thomas
Josephine
19216811.live