Page 26 / 344
Scroll up to view Page 21 - 25
Chapter 1 Introducing the ZyXEL Device
P-2601HN(L)-F1 Series User’s Guide
26
configuration file. This means that you will lose all configurations that you had
previously and the passwords will be reset to the defaults.
1
Make sure the
POWER
LED is on (not blinking).
2
To set the device back to the factory default settings, press the
RESET
button for
5 seconds or until the
POWER
LED begins to blink and then release it. When the
POWER
LED begins to blink, the defaults have been restored and the device
restarts.
1.7
The WIRELESS ON/OFF Button
Use the
WIRELESS ON/OFF
button (
) on the top of the device to turn the
wireless LAN off or on. You can also use it to activate WPS in order to quickly set
up a wireless network with strong security. Make sure the
POWER
LED is on (not
blinking) before using the
WIRELESS ON/OFF
button.
•
Press the
WIRELESS ON/OFF
button for one to five (1 - 5) second/s and
release it. The
WIRELESS
LED should change from on to off or vice versa.
•
Press the
WIRELESS ON/OFF
button for more than five seconds to turn on
WPS. See
Section 6.4 on page 93
for more on using WPS to configure your
wireless clients.
Page 27 / 344
P-2601HN(L)-F1 Series User’s Guide
27
C
HAPTER
2
Introducing the Web
Configurator
2.1
Overview
The web configurator is an HTML-based management interface that allows easy
device setup and management via Internet browser. Use Internet Explorer 6.0 and
later versions, Mozilla Firefox 3 and later versions, or Safari 2.0 and later versions.
The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
•
Web browser pop-up windows from your device. Web pop-up blocking is enabled
by default in Windows XP SP (Service Pack) 2.
•
JavaScript (enabled by default).
•
Java permissions (enabled by default).
See
Appendix C on page 291
if you need to make sure these functions are allowed
in Internet Explorer.
2.1.1
Accessing the Web Configurator
1
Make sure your ZyXEL Device hardware is properly connected (refer to the Quick
Start Guide).
2
Launch your web browser.
3
Type "192.168.1.1" as the URL.
Page 28 / 344
Chapter 2 Introducing the Web Configurator
P-2601HN(L)-F1 Series User’s Guide
28
4
A password screen displays. Type “admin” (default) as the username and “1234”
as the password, and click
Login
. If you have changed the password, enter your
password and click
Login
.
Figure 5
Password Screen
Note: For security reasons, the ZyXEL Device automatically logs you out if you do not
use the web configurator for five minutes (default). If this happens, log in again.
5
The following screen displays if you have not yet changed your password. It is
strongly recommended you change the default password. Enter a new password,
retype it to confirm and click
Apply
; alternatively click
Skip
to proceed to the
main menu if you do not want to change the password now.
Figure 6
Change Password Screen
Page 29 / 344
Chapter 2 Introducing the Web Configurator
P-2601HN(L)-F1 Series User’s Guide
29
6
The
Connection Status
screen appears.
Figure 7
Connection Status
7
Click
System Info
to display the
System Info
screen, where you can view the
ZyXEL Device’s interface and system information.
Page 30 / 344
Chapter 2 Introducing the Web Configurator
P-2601HN(L)-F1 Series User’s Guide
30
2.2
The Web Configurator Layout
Click
Connection Status > System Info
to
show the following screen.
Figure 8
Web Configurator Layout
As illustrated above, the main screen is divided into these parts:
•
A
- title bar
•
B
- main window
•
C
- navigation panel
B
C
A
19216811.live