Page 291 / 359
Scroll up to view Page 286 - 290
Appendix A Setting up Your Computer’s IP Address
eircom F1000 Modem User’s Guide
291
• Click
Advanced
.
Figure 180
Windows XP: Internet Protocol (TCP/IP) Properties
6
If you do not know your gateway's IP address, remove any previously installed gateways in the
IP
Settings
tab and click
OK
.
Do one or more of the following if you want to configure additional IP addresses:
•
In the
IP Settings
tab, in IP addresses, click
Add
.
• In
TCP/IP Address
, type an IP address in
IP address
and a subnet mask in
Subnet mask
,
and then click
Add
.
•
Repeat the above two steps for each IP address you want to add.
•
Configure additional default gateways in the
IP Settings
tab by clicking
Add
in
Default
gateways
.
• In
TCP/IP Gateway Address
, type the IP address of the default gateway in
Gateway
. To
manually configure a default metric (the number of transmission hops), clear the
Automatic
metric
check box and type a metric in
Metric
.
• Click
Add
.
•
Repeat the previous three steps for each default gateway you want to add.
Page 292 / 359
Appendix A Setting up Your Computer’s IP Address
eircom F1000 Modem User’s Guide
292
• Click
OK
when finished.
Figure 181
Windows XP: Advanced TCP/IP Properties
7
In the
Internet Protocol TCP/IP Properties
window (the
General
tab in Windows XP):
• Click
Obtain DNS server address automatically
if you do not know your DNS server IP
address(es).
•
If you know your DNS server IP address(es), click
Use the following DNS server
addresses
, and type them in the
Preferred DNS
server
and
Alternate DNS server
fields.
Page 293 / 359
Appendix A Setting up Your Computer’s IP Address
eircom F1000 Modem User’s Guide
293
If you have previously configured DNS servers, click
Advanced
and then the
DNS
tab to order
them.
Figure 182
Windows XP: Internet Protocol (TCP/IP) Properties
8
Click
OK
to close the
Internet Protocol (TCP/IP) Properties
window.
9
Click
Close
(
OK
in Windows 2000/NT) to close the
Local Area Connection Properties
window.
10
Close the
Network Connections
window (
Network and Dial-up Connections
in Windows
2000/NT).
11
Turn on your Device and restart your computer (if prompted).
Verifying Settings
1
Click
Start
,
All Programs
,
Accessories
and then
Command Prompt
.
2
In the
Command Prompt
window, type "ipconfig" and then press [ENTER]. You can also open
Network Connections
, right-click a network connection, click
Status
and then click the
Support
tab.
Windows Vista
This section shows screens from Windows Vista Enterprise Version 6.0.
Page 294 / 359
Appendix A Setting up Your Computer’s IP Address
eircom F1000 Modem User’s Guide
294
1
Click the
Start
icon,
Control Panel
.
Figure 183
Windows Vista: Start Menu
2
In the
Control Panel
, double-click
Network and Internet
.
Figure 184
Windows Vista: Control Panel
3
Click
Network and Sharing Center
.
Figure 185
Windows Vista: Network And Internet
Page 295 / 359
Appendix A Setting up Your Computer’s IP Address
eircom F1000 Modem User’s Guide
295
4
Click
Manage network connections
.
Figure 186
Windows Vista: Network and Sharing Center
5
Right-click
Local Area Connection
and then click
Properties
.
Note: During this procedure, click
Continue
whenever Windows displays a screen saying
that it needs your permission to continue.
Figure 187
Windows Vista: Network and Sharing Center
19216811.live