1. Home
    2. /
  2. Manuals
    3. /
  3. ZTE
    4. /
  4. ZXV10-W300v5
    5. /
  5. 5
Page 21 / 89 Scroll up to view Page 16 - 20
ZXV10 W300 (V5.2) Wireless ADSL Router Maintenance Manual
Default Settings
The factory default settings for a W300 router are listed as follows:
IP address: 192.168.1.1; subnet mask: 255.255.255.0.
Use the DHCP server by default (i.e., the IP address can be obtained from t
he W300 automatically via DHCP).
Line coding: Auto negotiation (T1.413/G.DMT/G.LITE/ADSL2 /ADSL2+).
Default network name (SSID) for WLAN, wireless encryption mode, and enc
ryption key are also marked on the label shown on the cover of the W300 r
outer.
Note:
If the W300 router fails to work due to error configuration or if the user forgets
the login password, insert a needle into the device’s
Reset
hole when the device is
running and hold
Reset
down for more than 10 seconds to restore the settings to the
default ones, then the system restarts automatically.
Computer Configuration
This section shows how to check computer configuration and configure TCP/I
P for a W300.
Checking Computer Configuration
If the computer uses a proxy server to access the Internet, it is suggested to
disable this proxy service before performing the configurations. It is recomm
ended to close the VPN software and the firewalls running on the computer.
For example, in Microsoft Internet Explorer, the user may check the proxy se
rvice configuration as follows:
10
Proprietary Information of ZTE CORPORATION
Page 22 / 89
Chapter 2 - Product Installation
1.
In the browser, select
Tools > Internet Options
.
2.
Click the
Connections
tab and then click the
LAN Settings
button.
3.
Uncheck the
Use a proxy server for your LAN
box if it is checked.
4.
Click the
OK
button.
Configuring TCP/IP
If the operating system of the computer is one of the following ones: Window
s95, Windows98, WindowsME, Windows2000, and WindowsXP, there are two
ways for configuring the computer (the first one is recommended). The follo
wing instruction uses WindowsXP as an example (the method under another
operation system is similar).
To obtain an address from the W300 via DHCP, perform the following
procedure in the computer:
1.
In Windows taskbar, select
Start
>
Control Panel
.
2.
Double-click the
Network Connection
icon.
3.
Right click
Local Area Connection
,and select
Properties
.
4.
Select
Internet Protocol (TCP/IP)
, and then click the
Properties
butt
on.
5.
In the
Internet Protocol (TCP/IP) Properties
dialog box, check
Obtai
n an IP address automatically
and check
Obtain DNS server addre
ss automatically
.
6.
Click
OK
to confirm and save the settings.
To configure a static address, perform the following procedure in the
computer:
1.
In Windows taskbar, select
Start
>
Control Panel
.
2.
Double-click the
Network Connection
icon.
3.
Right click
Local Area Connection
,and select
Properties
.
4.
Select
Internet Protocol (TCP/IP)
, and then click the
Properties
butt
on.
5.
In
Internet Protocol (TCP/IP) Properties
dialog box, check
Use the f
ollowing IP address
to specify this computer's IP address. This IP addr
Proprietary Information of ZTE CORPORATION
11
Page 23 / 89
ZXV10 W300 (V5.2) Wireless ADSL Router Maintenance Manual
ess shall be in the same network segment as the LAN port address of th
e W300 and shall be in the form 192.168.1.x (x is a decimal integer bet
ween
2~254, for
example
,
192.168.1.2). Subnet mask is
set to
255.255.
255.0
. D
efault
g
ateway is set to 192.168.1.1.
6.
Check
Use the following DNS server addresses
. To set the IP addres
s of the DNS server
, c
ontact local service provider or set it to 192.168.1.
1.
Click
OK
to confirm and save the settings.
12
Proprietary Information of ZTE CORPORATION
Page 24 / 89
C h a p t e r
3
Configuration Page Login
This chapter introduces how to log into the configuration page and presents
the default main page after login.
Follow the precedures below to log into the web configuration page.
To log into configuration page:
1.
Open a brows
er
(e.g, IE)
and t
ype
(i.e., default IP a
ddress
of
the W300’s LAN port) in the address bar.
2.
Press the
Enter
key of the keyboard to display the login dialog box, as s
hown in Figure 5.
Proprietary Information of ZTE CORPORATION
13
Page 25 / 89
ZXV10 W300 (V5.2) Wireless ADSL Router Maintenance Manual
F
I G U R E
5 T
H E
L
OG I N
D
I A L O G
B
OX
3.
Enter the default user name
admin
and password
admin
, and then clic
k the
OK
button to enter the main page for configuration, as shown in Fi
gure 6.
14
Proprietary Information of ZTE CORPORATION

Rate

4.5 / 5 based on 2 votes.

Popular ZTE Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top