1. Home
    2. /
  2. Manuals
    3. /
  3. ZTE
    4. /
  4. ZXV10-W300v5
    5. /
  5. 3
Page 11 / 89 Scroll up to view Page 6 - 10
ZXV10 W300 (V5.2) Wireless ADSL Router Maintenance Manual
For Service
Do not attempt to disassemble, repair, or open this product, which will lose t
he warranty services. Contact qualified service personnel in case of problem
s, especially under the following conditions:
The power socket or cable is damaged.
Liquid is splashed into the product.
The product is exposed to rain or water.
The product does not work normally when the operating instructions are
followed.
The product is dropped or struck, causing the product damaged.
vi
Proprietary Information of ZTE CORPORATION
Page 12 / 89
C h a p t e r
1
Introduction
This chapter gives an overview of the W300 router, presents the packing list,
introduces the front and rear panels and system requirements.
Overview
W300 is a home and SOHO oriented wireless broadband router integrating A
DSL, AP and LAN Switch. It provides triple-play services such as Internet data,
voice access, and video access. W300 provides priority access for different s
ervices with sophisticated ATM-based and IP-based QoS to meet different req
uirements for high-speed Internet access, IPTV Video on Demand (VoD), live-
broadcast access and voice access. Wireless encryption and built-in firewall
prevent unauthorized users from accessing the network, ensuring the securit
y of legal users accessing the wired and wireless networks. W300 supports T
R-069 protocols for allowing overall remote network management.
Note:
ZTE CORPORATION reserves the right to modify technical
specifications in this manual without any notification in advance.
Proprietary Information of ZTE CORPORATION
1
Page 13 / 89
Packing List
The package box for a W300 includes the following components, as shown in
Table 4.
T
A B L E
4 P
A C K I N G
L
I S T
Component
Quantity
ZXV10 W300 Wireless ADSL Router
1
External splitter
1
Power adapter
1
Telephone line
2
Straight-through Ethernet cable
1
Warranty card
1
ZXV10 W300 V5.2 Wireless ADSL Router User Manual
1
Note:
Components actually delivered depend on the service
provider. If any component is missing or damaged, immediately
contact the service provider. Please keep the packing box and
components well in case of replacement.
Front Panel
F
I G U R E
1 F
R O N T
P
A N E L
Proprietary Information of ZTE CORPORATION
2
Page 14 / 89
Chapter 2 - Product Installation
There are eight indicators on the front panel of a W300 indicating the runnin
g status of the device, as shown in Figure 1. These indicators are described i
n Table 5.
T
A B L E
5 D
ES C R I P T I O N S
F O R
T H E
I
N D I C A T O R S
Indicator
Color
Description
Power
Red/Gre
en
Red:Indicates the power is just connected or it fails
to function.
Green Steady on: Indicates switched on.
Off: Indicates the power has not been connected
DSL
Green
Steady on: Indicates a DSL link is established.
Slow flashing: Indicates no signal is detected.
Fast flashing: Indicates the MODEM is activating.
Internet
Green
Steady on: Indicates operating in Route mode and
the ADSL link is established. The IP data packet of
the MODEM can be transmitted and received
normally (For example, the embedded PPPOE link is
established and a dynamic IP address is allocated.).
Flashing: Indicates operating in Route mode and
there is data packet passing the MODEM.
Off: Indicates operating in Bridge mode or ADSL link
is not established.
LAN1
LAN2
LAN3
STB
Green
Steady on: Indicates a LAN connection is
established.
Flashing: Indicates data is transmitting.
Off: Indicates the LAN connection has not been
established
WLAN
Green
Steady on: Indicates the wireless module is on.
Flashing: Indicates wireless data is transmitting.
Off: Indicates the wireless module is off.
Proprietary Information of ZTE CORPORATION
3
Page 15 / 89
ZXV10 W300 (V5.2) Wireless ADSL Router Maintenance Manual
Rear Panel
F
I G U R E
2 R
E A R
P
A N E L
There are seven ports and buttons on the rear panel of a W300, as shown in
Figure 2. These ports and buttons are described in Table 6.
T
A B L E
6
D
E S C R I P TI O N S
F O R
T H E
P
O R T S
A N D
B
U T T O N S
Identification
Description
POWER
Connected to the companion power adapter.
SWITCH
Power switch
LINE
Connected to the ADSL line or splitter via RJ-11 telephone line.
LAN1~ LAN3 &
STB
Connected to PC’s network interface card (NIC) or another
network device via RJ-45 cable. For Ethernet uplink mode,
connect the Ethernet subscriber line to LAN1 port.
System Requirements
System requirements for the W300 router are as follows:
The user has already subscribed the ADSL or Ethernet service. The service
provider shall provide at least one legal IP address (allocated either
statically or dynamically).
One or more PCs with 10/100M Ethernet Network Interface Card (NIC).
4
Proprietary Information of ZTE CORPORATION

Rate

4.5 / 5 based on 2 votes.

Popular ZTE Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top