Page 36 / 56
Scroll up to view Page 31 - 35
36 Confidential and Proprietary Information of ZTE CORPORATION
3. Input the detailed information in the
Mac/IP/Port Filtering
area.
4. Click
Apply
in the
Mac/IP/Port Filtering
area.
Port Forwarding
You can setup virtual servers to provide services on the Internet. Select
Settings > Firewall > Port
Forwarding,
If you select
Enable
, the Virtual Server Settings will appear:
•
IP Address
: Set IP address for the virtual server.
•
Port Range
: Set port numbers for the virtual server.
•
Protocol
: Set protocol for the virtual server.
•
Comment
: Type comment for the virtual server settings.
Page 37 / 56
Confidential and Proprietary Information of ZTE CORPORATION 37
Select
Enable
, and input the detailed information in the
Virtual Server Settings
area, then click
Apply
to
add a new rule.
Click
Delete
to remove the rule which you selected.
Click
Reset
to restore default values.
System Security
You can configure system firewall to protect the 4G Mobile Hotspot from being attacked. Select
Settings > Firewall > System Security
,
Enable
or
Disable
the remote management function and ping from WAN filter function on requirement,
and then click
Apply
.
Click
Reset
to restore the default value.
Settings > Advanced
Status
Select
Settings > Advanced > Status
,
Page 38 / 56
38 Confidential and Proprietary Information of ZTE CORPORATION
Management
Select
Settings > Advanced > Management
,
After successful login, you can change the a
dministrator’s password. Click
Apply
to confirm your
configuration. The password is for use on the T-Mobile Hotspot Admin page. This is not the password to
be used when connecting to your Mobile Hotspot.
Notes:
In case you forget your administrator’s pa
ssword, please restore the 4G Mobile Hotspot (see below figure)
to factory default settings and login with the default password
admin
.
Restore
Select
Settings > Advanced > Restore
, click
Restore
to set all the settings to their factory default values,
and then the 4G Mobile Hotspot will restart automatically.
SIM PIN Manage
This section is for you to set or change PIN code for your SIM card.
Select
Settings > Advanced > SIM PIN Manage
,
Page 39 / 56
Confidential and Proprietary Information of ZTE CORPORATION 39
•
SIM
PIN Status
: Displays the current PIN status.
•
Action
: Enable, Disable or Modify, and then click
Apply
to activate the corresponding function.
•
SIM PIN:
Type the PIN code.
•
SIM
PIN Save
: Check the Save box, then click
Apply
to enable PIN save function. After you enable
this function, the 4G Mobile Hotspot will save your PIN code, and you do not need to input PIN code
each time when the device is powered on.
If you select
Modify
, the modification parameters are shown in the following figure:
Page 40 / 56
40 Confidential and Proprietary Information of ZTE CORPORATION
Enter the old PIN code. You will then need to enter the new PIN code twice Click
Apply
to confirm your
configuration.
Notes:
•
Entering the wrong PIN code for three consecutive times will block the SIM card.
•
After you changed the PIN code, you still need to input PIN code again, even though you enable PIN
save function.
Router
Select
Settings > Advanced > Router
,
19216811.live