Page 16 / 31
Scroll up to view Page 11 - 15
Page 16 of 31
•
WPS uses the push button on the front panel to connect seamlessly to
supported devices.
•
Press WPS to enable, compatible devices can connect to your Wi-Fi network
without authorisation, or you can set a PIN if required.
•
WPS is enabled for 2 minutes once pressed and the device LED’s will flash to
indicate WPS mode.
•
If you have enabled PIN mode then you need to enter the same PIN on devices
you wish to connect.
•
Press the Help icon
to get in context tips
SETTINGS > DEVICE SETTINGS > ACCOUNT
MANAGEMENT
•
Use the Account Management settings to change the administrator password if
required.
•
The default password is password. If you have changed and forgotten the
password then you need to restore the device to factory defaults:
1. With the device switched on open the SIM slot cover and locate the reset
button next to the SIM slot.
2. Using an item such as a paperclip or pin press the “Reset” button briefly until
the LED’s go out.
3. The device will re-start with factory default settings.
•
Press the Help icon
to get in context tips
Page 17 / 31
Page 17 of 31
SETTINGS > DEVICE SETTINGS > USIM PIN
MANAGEMENT:
•
Enter your current PIN code to change or disable the PIN
•
If you make any changes, press Apply to save the change
•
If you enter the incorrect PIN code three times in succession you will lock your
SIM card.
•
Contact your service provider to obtain your PUK code
•
Press the Help icon
to get in context tips
SETTINGS > DEVICE SETTINGS > RESET
•
Press Reset to reset your device to factory defaults.
SETTINGS > DEVICE SETTINGS > RESTART
•
Press Restart to restart your device.
Page 18 / 31
Page 18 of 31
SETTINGS > DEVICE SETTINGS > POWER SAVE
•
If there is no Wi-Fi traffic detected then the device will switch off Wi-Fi as
determined by the Wi-Fi sleep setting.
•
Set Wi-Fi sleep time to Never Sleep to keep the Wi-Fi always on.
•
Press the Help icon
to get in context tips
SETTINGS > DEVICE SETTINGS > SOFTWARE UPDATE
•
With Check for New Version enabled you are notified in the web user interface if
there is an update available.
•
You need to be in the Connected state to download new versions.
Page 19 / 31
Page 19 of 31
•
Press the Update Now button to see if there are software updates for your
device.
•
Roaming Settings control if the device will update when roaming. This is
disabled to reduce high data charges when roaming.
•
Press the Help icon
to get in context tips
•
Example software update notification:
SETTINGS > FIREWALL > PORT FILTERING
•
Select Enable to turn on the Port Filtering settings
•
You can apply filters based on MAC Address, Source IP Address, Destination IP
Address and select the action to drop or accept the packets.
•
Firewall settings are for advanced users and network administrators.
•
Press the Help icon
to get in context tips
Page 20 / 31
Page 20 of 31
SETTINGS > FIREWALL > PORT FORWARDING
•
Select Enable to turn on the port forwarding settings.
•
Port forwarding can be used to allow a specific external server or computer
access to devices located on your LAN side or to translate a specific incoming
port into a different destination port.
•
The destination port and address is on your local LAN side.
•
Typical applications will be for on-line gaming requiring specific control and
communications channels between the remote server and the local machine.
•
Firewall settings are for advanced users and network administrators.
•
Press the Help icon
to get in context tips
19216811.live