1. Home
    2. /
  2. Manuals
    3. /
  3. ZTE
    4. /
  4. MF910V

ZTE MF910V Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of ZTE MF910V router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 31
Page 1 of 31
TELSTRA 4GX WI-FI (MF910V)
USER MANUA
L
Copyright © 2016. All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on errors or
update specifications without prior notice.
The worst case simultaneous Wi-Fi and RF SAR result for this device is 1.918W/Kg
in the Body Position with 10mm separation.
Search ‘ZTE Australia’ on Facebook , Google+ and Twitter to keep in touch.
Version 1.0
Jan 2016
CHECK YOUR SYSTEM REQUIREMENTS
Your 4GX Wi-Fi will connect to any Wi-Fi enabled device that supports Wi-Fi
802.11 b/g/n
A web browser is required to log in to your Wi-Fi hotspot if you wish to make any
configuration changes.
USB driverless connection is also supported for Windows (not RT), and MAC
operating systems:
•
Windows 10, 8 (not including RT) / 7 / XP / Vista
•
MAC OS X 10.7 and above
Using the USB connection requires administrator rights to install and run the
software.
We suggest you switch off your anti-virus software before connecting the hotspot
- In some cases protection software can prevent automatic installation.
Page 2 / 31
Page 2 of 31
It is possible to start the installation process manually by clicking the Autorun icon
when it appears.
GET TO KNOW YOUR DEVICE
Page 3 / 31
Page 3 of 31
INSERT YOUR STANDARD SIZED SIM CARD
This device supports a Standard sized SIM card ONLY (2FF). Do not use a microSIM
or SIM card adaptor which may damage your device.
The SIM card is pre-installed and needs to be activated.
You may need this
information if you need to replace or check your SIM card.
1.
Locate the SIM slot on the side of the device as shown above.
2.
Open the SIM slot cover.
3.
Insert your SIM card carefully as shown. The gold contacts must be facing
up
with the cut corner towards the middle of the device.
4.
Push the SIM fully home until it clicks into place.
5.
For reference the Reset button is also located under the SIM slot cover.
6.
Note: If you replace the SIM card with the device powered On, it will restart to
read the new SIM card.
IMPORTANT
This device supports a standard SIM or 2FF size.
Do not insert a micro SIM (3FF) or use a micro to mini SIM adaptor.
Use of 3
rd
party adaptors or non approved SIM card can damage your device.
Physical damage to the SIM card slot is not covered by warranty and will make
your device unusable.
TIPS
Remember to keep your Security Card handy and in a safe place. You will need it to
log onto your device.
Remember to keep your plastic SIM card holder. It has a record of your SIM card
details which you should keep handy.
The Reset button is located under the SIM slot cover. With the device switched on,
Page 4 / 31
Page 4 of 31
press the Reset button until the LED’s go out. A reset will restore all settings to
factory default.
Use the default Wi-Fi SSID and Password shown on the device sticker to log in via
Wi-Fi.
You can also connect directly to a computer using the USB lead provided, log into
the web interface and access the Wi-Fi SSID and Password from the Wi-Fi Settings
menu.
See Connect Devices via Wi-Fi (below) for more instructions.
CHARGE YOUR WI-FI HOTSPOT
Connect your charger as shown. Take care to check the orientation of the charger
lead and insert carefully into the charging port on the device.
•
Only use the genuine charger and USB lead provided. Use of third party
adaptors can damage your device.
•
Typical charging time is 3-4 hours using the standard charger. Charging from a
USB source (ie laptop) will take longer.
•
During periods of high continuous activity with multiple users, high download
rates or low network signal, charging by USB will not have sufficient current to
charge the device. In this situation the battery will discharge so it is preferable
to use the mains charger.
•
Always insert and remove the charging lead with care and take care not to trip
or pull on the lead harshly which could damage your device.
Page 5 / 31
Page 5 of 31
•
Physical damage to the charging port is not covered by warranty.
•
If the device is off while charging, press the power key as normal to switch on
the device.
•
The device can be left always on and connected to the charger if required.
•
During periods of high continuous activity, high download rates or low network
signal it is normal for the device to get hot.
•
If the internal temperature of the device exceeds 45C then the battery cannot
be charged due to safety limitations with Li-ion batteries.
POWER UP YOUR WI-FI HOTSPOT
Press and hold the Power key for 1-2 seconds until the LED’s light up.
The Wi-Fi hotspot will be available after about 20 seconds.
Check the condition of your Wi-Fi hotspot as shown by the LED’s.
To switch your device Off, press and hold the power key for 5 seconds until the
LED’s starts to shut down.
LED’S INDICATORS
BATTERY
INDICATOR
Green, Battery is charged
Flashing, Battery is charging
Red, Battery is low
WI-FI
INDICATOR
Green – Wi-Fi is active and connected
DATA USAGE
INDICATOR
Green, Data credit is healthy (less than 85% used)
Orange, Data credit is low (more than 85% used)
Red, Data credit is expired (more than 99% used)
NETWORK
INDICATOR
Blue, Registered on 4G – Flashing, device is Connected to
the 4G Network
Green, Registered on 3G or 2G – Flashing, device is
Connected to the 3G or 2G Network
Red, Device is not connected eg No SIM card, Locked SIM
or No Network available
TIPS
When running on battery during periods of inactivity it is normal for the LED’s to
go out to preserve battery life. Press the power key briefly to confirm the device
status if required.
When connected to the charger the LED’s remain lit all the time.

Rate

4.5 / 5 based on 2 votes.

Popular ZTE Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top