1. Home
  2. /
  3. Manuals
  4. /
  5. ZTE
  6. /
  7. MF910
  8. /
  9. 8
Page 36 / 39 Scroll up to view Page 31 - 35
Page 36 of 39
PRECAUTIONS AND SAFETY INFORMATION
Some electronic devices are susceptible to electromagnetic interference. The
modem is a transmitting device and may cause interference to sensitive
electronic equipment such as audio systems, vehicle systems and medical
equipment. Please consult the manufacturer of the other device before using
the modem.
Operating of laptop or desktop PCs with the modem may interfere with medical
devices like hearing aids and pacemakers. Please keep the modem more than 20
centimetres away from such medical devices. Turn the modem off if necessary.
Consult a physician or the manufacturer of the medical device before using the
modem near such devices.
Be aware of regulations when using the modem at places such as oil refineries
or chemical factories, where there are explosive gases or explosive products
being processed. Turn off your modem as instructed.
Don’t touch the antenna area unnecessarily whilst connected. This can affect
your modem performance and reduce the signal quality.
Store the modem out of the reach of children. The modem may cause injury or
get damaged.
The modem contains sensitive electronic circuitry. Do not expose the modem to
any liquids, high temperatures or shock.
Only use original accessories or accessories that are authorised by the
manufacturer. Using unauthorised accessories may affect your modem’s
performance or damage your modem.
Avoid using the modem in areas that emit electromagnetic waves or in enclosed
metallic structures eg lifts.
The modem is not waterproof. Please keep it dry and store it in a cool, dry place.
Don’t use the modem immediately after a sudden temperature change eg from
an air conditioned environment to high temperature and humidity outside. In
such cases there could be condensing moisture inside the modem which can
cause internal damage. Unplug the modem and leave it for 30 minutes before
use.
Always handle the modem with care. Be careful not to drop or bend the
modem.
There are no user serviceable parts inside the modem. Unauthorised
dismantling or repair will void the warranty.
Take care when connecting and removing an external antenna. The correct
adaptor (TS9) must be used and the ports are delicate and must be handled with
care. Do not pull or tug on the antenna leads and take care not to trip over them
Page 37 / 39
Page 37 of 39
when plugged in.
Physical damage to the antenna ports will render your device unusable and is
not covered by the manufacturer’s warranty.
The internal battery is not replaceable by the end user. Return to your service
centre for repair.
Do not disassemble the case to change the battery, do not disassemble or short
circuit the battery terminals.
Do not dispose of the unit in a fire, the internal battery may explode.
At the end of life of the equipment, return the product to a suitable recycling
agent such as Mobile Muster.
Page 38 / 39
Page 38 of 39
RF SAFETY INFORMATION
The Wi-Fi modem has an internal antenna. For optimum performance with
minimum power consumption do not shield the device or cover with any object.
Covering the antenna affects signal quality and may cause the modem to operate
at a higher power level than needed.
RADIO FREQUENCY ENERGY
The Wi-Fi modem is a low-power radio transmitter and receiver. When switched
on it intermittently transmits radio frequency (RF) energy (radio waves).
The transmit power level is optimized for best performance and automatically
reduces when there is good quality reception.
Maximum power is only used at the edge of network coverage so under most
circumstances the power output is very low.
Under poor network conditions the modem transmits at a higher power level and
may get hot.
DECLARATION OF CONFORMITY – SPECIFIC ABSORPTION RATE (SAR)
The Wi-Fi modem is designed to be used in close proximity to the body. We
declare that the product detailed in this manual, and in combination with our
accessories, conform with the essential requirements of The Radio
Communications Standard (Electromagnetic Radiation Human Exposure) 2003 and
the Australian Communications and Media Authority Section 376 of the
Telecommunications Act 1997 when used at a distance of not less than 10mm
from the body. The worst case SAR result is 1.458W/Kg (10g average) with 10mm
spacing in the Body position. The limit is 2.0W/Kg
N14945
Page 39 / 39
Page 39 of 39
TECHNICAL SPECIFICATIONS
Network compatibility
LTE 700, 900, 1800, 2100, 2600 MHz
UMTS 850, 900, 2100 MHz
GSM 850, 900, 1800, 1900 MHz
Dimensions
100 x 62.8 x 13.5mm. Approx 120g
Data Rates*
LTE download speeds up to 150Mb/s
LTE upload speeds up to 50Mb/s
HSPA+ Downlink up to 42Mb/s
HSDPA Mode up to 21.6Mb/s
HSUPA Mode up to 5.76Mb/s
Battery
2300mAh internal battery, non user
replaceable
Operating Time**
Up to 8 hours operating time. Up to 300 hrs in
standby mode with Wi-Fi off.
Voltage
5V
Current
Resting: 100mA rms
Max: 500mA rms
Operating systems
Any Wi-Fi enabled device, 802.11b/g/n
Windows 8, 7, XP SP3, Vista
MAC OS X 10.5 and above
Antenna ports
Dual TS9 connectors
Temperature
-5ºC to +45ºC
* Download speeds will vary due to distance from the cell, local conditions, user
numbers, file source, hardware, software and other factors.
** Operation and Standby times depend on a number of conditions and are
measured in ideal conditions.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top