Page 31 / 39
Scroll up to view Page 26 - 30
27
System Security
You can configure system firewall to protect AP or router from being attacking. Select
Firewall > System
Security
, the system security setting is shown in the following figure:
Allow
or
Deny
the remote management function,
Allow
or
Deny
ping from WAN filter on requirement,
and then click
Apply
.
Advanced
Status
Select
Settings > Advanced > Status
, the system information is shown in the following figure:
Management
Page 32 / 39
28
Select
Settings > Advanced > Management
, the administrator settings information is shown in the
following figure:
You can change the administrator’s password. Click
Apply
to confirm your configuration.
Restore
Select
Settings > Advanced > Restore
, click
Restore
to set all the settings to their factory default values,
and then the device will restart automatically.
PIN Manage
Note: Pin Manage can be used in 3G Gateway mode.
Select
Settings > Advanced > PIN Manage
, the PIN manage is shown in the following figure:
If you select
Modify
, the modification parameters are shown in the following figure:
Page 33 / 39
29
Type the old PIN code, and then type two times the new PIN code. Click
Apply
to confirm your
configuration.
Notes:
Three times consecutive wrong PIN code entries will block the (U)SIM card. To unlock, you need PUK.
PIN code and PUK code may be offered together with the (U)SIM Card. If not, please contact with
network operator.
Router
Note: Router can be used in 3G Gateway mode and Cable Broadband mode.
Select
Settings > Advanced > Router
, the router information is shown in the following figure:
•
IP Address
: IP address for LAN interface.
Page 34 / 39
30
•
Subnet Mask
: Subnet mask for the IP address.
•
MAC Address
: MAC address for the LAN interface.
•
DHCP Server
: Enable or disable DHCP Server function.
•
DHCP IP Pool
: Allocate begin and end IP address for IP pool.
•
DHCP Lease Time
: Define how long the leased IP address will be expired, and will relocate new IP
address.
Click
Apply
to confirm your configuration.
Upgrade Firmware
Select
Settings > Advanced > Upgrade Firmware
to upgrade the software version of the router.
Click
Browse...
, locate the latest software version, and then click
Upgrade
.
Time
Select
Settings > Advanced > Time
to set the time of the router.
Usage of WPS
If your client device supports WPS, you need not to input the password manually after WPS has
been available. Please do the following:
1. Start up your device.
2. Launch the client device connected to your device.
3. Enable the WPS function of your device.
Page 35 / 39
31
4. Enable the WPS function of the client.
Notes:
For the detailed operations about the client, please refer to the
client’
s instruction.
Logout
Select
Logout
, a pop-up window will appear as the following figure shown:
Click
OK
to logout the web page.
19216811.live