Page 16 / 39
Scroll up to view Page 11 - 15
12
The whole interface is divided into three parts. Related functions can be executed by operation in the
related areas.
•
Index area:
Show the configuration list for your device.
•
Content area:
Show the detailed configuration.
•
System Information Area:
Show the system status and different kinds of tips.
Operation Mode
When you fist login the webGUI, you need to choose the operation mode to make the correct setting.
Page 17 / 39
13
There are three operation mode:
•
Bridge Mode
：
Connect to Internet by WAN/LAN interface.
•
Cable Broadband: Connect to Internet by WAN interface.
•
3G Gateway: Connect to Internet by (U)SIM.
Please choose the correct operation mode according to your actual network condition. For detailed
information, please contact network operator. Click
Apply
to finish the setting.
WAN Connection
In Cable Broadband mode
Click
WAN Connection
, you can configure how to connect to the Internet.
Select
PPPoE
，
input the
User Name
and
Password
supplied by the network provider, and select the
Connect mode.
•
Auto Connect
: The router will automatically connect to WAN when it is powered on.
•
Manual Connect
: Connect to Internet or disconnect from Internet manually.
Click
Apply
to confirm your configuration, and then the figure will show in the wan connection status.
In 3G Gateway mode
Click
WAN Connection
, you can configure how to connect to the Internet.
Page 18 / 39
14
There are two connection modes:
•
Auto Connect
: The router will automatically connect to WAN when it is powered on.
•
Manual Connect
: Connect to Internet or disconnect from Internet manually.
Click
Apply
to confirm your configuration, and then the figure will show in the wan connection status.
SMS
This function allows you to send or receive short messages. And you can use this function only in 3G
Gateway mode.
Sending new SMS
1.
Select
SMS > New Message
to access the following figure:
2. Enter the recipient’s phone number.
3. Enter a message.
4. Click
Send
to send the message.
Operating Messages in native
You can check the messages saved in your device.
Inbox
Select
SMS > Inbox
to access the following figure:
All the received messages saved in your device will be displayed here.
Page 19 / 39
15
•
Click
View
to view the selected message.
•
Click
Reply
to reply to the selected message sender.
•
Click
Forward
to forward message to other person.
•
Click
Delete
to delete the selected message.
•
Click
Delete All
to delete all the messages.
Outbox
Select
SMS > Outbox
to access the following figure:
All the sent messages in your device will be displayed here.
Drafts
Select
SMS > Drafts
to access the following figure:
All the drafts saved in your device will be displayed here.
•
Click
View
to access the edited interface of selected message, then click
Send
to send it.
Settings
•
Do not modify any settings unless instructed by your service provider.
•
Please disconnect the device from the network before change the settings.
Page 20 / 39
16
3G Settings
Wireless Info
Select
Settings > 3G Settings > Wireless Info
, the 3G wireless information is shown in the following
figure:
Click
Refresh
to update the wireless information.
Network Select
Select
Settings > 3G Settings > Network Select
, the Band Selection Mode is shown in the following
figure:
•
Automatic
: Device searches for available network.
•
WCDMA Only
: Device searches for WCDMA network only.
•
GSM Only
: Device searches for GSM network only.
Click
Apply
to confirm your configuration.
APN Setting
Select
Settings > 3G Settings > APN Setting
, the APN parameters are shown in the following figure:
19216811.live