Page 391 / 428
Scroll up to view Page 386 - 390
Configuring Computers to Use Network Printers
Chapter 18: Using Network Printers
377
Windows 2000/XP
This procedure is relevant for computers with a Windows 2000/XP operating system.
To configure a computer to use a network printer
1.
If the computer for which you want to enable printing is located on the WAN,
create an Allow rule for connections from the computer to
This Gateway
.
See
Adding and Editing Rules
on page 176.
2.
Click
Start
>
Settings
>
Control Panel
.
The
Control Panel
window opens.
3.
Click
Printers and Faxes
.
The
Printers and Faxes
window opens.
4.
Right-click in the window, and click
Add Printer
in the popup menu.
The
Add Printer Wizard
opens with the
Welcome
dialog box displayed.
5.
Click
Next
.
Page 392 / 428
Configuring Computers to Use Network Printers
378
Check Point ZoneAlarm User Guide
The
Local or Network Printer
dialog box appears.
6.
Click
Local printer attached to this computer
.
Note:
Do not select the
Automatically detect and install my Plug and Play printer
check
box.
7.
Click
Next
.
The
Select a Printer Port
dialog box appears.
8.
Click
Create a new port
.
9.
In the
Type of port
drop-down list, select
Standard TCP/IP Port
.
10.
Click
Next
.
Page 393 / 428
Configuring Computers to Use Network Printers
Chapter 18: Using Network Printers
379
The
Add Standard TCP/IP Port Wizard
opens with the
Welcome
dialog box displayed.
11.
Click
Next
.
The
Add Port
dialog box appears.
12.
In the
Printer Name or IP Address
field, type the ZoneAlarm router's LAN IP
address, or "my.firewall".
You can find the LAN IP address in the ZoneAlarm Portal, under
Network > My
Network
.
The
Port Name
field is filled in automatically.
13.
Click
Next
.
Page 394 / 428
Configuring Computers to Use Network Printers
380
Check Point ZoneAlarm User Guide
The
Add Standard TCP/IP Printer Port Wizard
opens, with the
Additional Port
Information Required
dialog box displayed.
14.
Click
Custom
.
15.
Click
Settings
.
The
Configure Standard TCP/IP Port Monitor
dialog box opens.
16.
In the
Port Number
field, type the printer's port number, as shown in the
Printers
page.
17.
In the
Protocol
area, make sure that
Raw
is selected.
18.
Click
OK
.
The
Add Standard TCP/IP Printer Port Wizard
reappears.
Page 395 / 428
Configuring Computers to Use Network Printers
Chapter 18: Using Network Printers
381
19.
Click
Next
.
The
Completing the Add Standard TCP/IP Printer Port Wizard
dialog box appears.
20.
Click
Finish
.
The
Add Printer Wizard
reappears, with the
Install Printer Software
dialog box
displayed.
21.
Do one of the following:
•
Use the lists to select the printer's manufacturer and model.
•
If your printer does not appear in the lists, insert the CD that came with your
printer in the computer's CD-ROM drive, and click
Have Disk
.
22.
Click
Next
.
19216811.live