Page 131 / 145
Scroll up to view Page 126 - 130
65xx-A1 Family Router Users Guide
131
IP Addresses
Web access to the router may be limited when Access Control Mode is enabled.
Note
: Do not change this information unless you are instructed to by your ISP technician. Adding
or changing the settings on this page may cause you to lose management access to the router.
To add the IP address to the IP address list:
Page 132 / 145
65xx-A1 Family Router Users Guide
132
1.
Click
Add
.
2.
In the
Add IP Addresses
screen, assign the IP address of the management station that is
permitted to access the local management services, in the
IP Address
text box.
3.
Enter the
Subnet Mask
.
4.
Click
Save / Apply
.
5.
In the
Access Control -- IP Address
screen, select the IP address then select
Enabled
to
enable Access Control Mode.
Update Software
Note
: Do not perform this operation unless you are instructed to by your ISP technician.
If your ISP releases new software for your router, follow these steps to perform an upgrade:
1.
Obtain an updated software image file from your ISP.
2.
Enter the path to the image file location or click on the
Browse
button to locate the image
file.
3.
Click
Update Software
once (and only once) to upload the new image file.
Page 133 / 145
65xx-A1 Family Router Users Guide
133
Reboot
Clicking
Save/Reboot
saves all the configurations you have made, then reboots the router using
the new configuration information.
Tools
The Ping and Trace Route tools may be used to verify accessibility and routes.
Page 134 / 145
65xx-A1 Family Router Users Guide
134
Page 135 / 145
65xx-A1 Family Router Users Guide
135
19216811.live