Page 126 / 145
Scroll up to view Page 121 - 125
65xx-A1 Family Router Users Guide
126
If the selected mode is
Remote
or
Both
, events will be sent to the specified IP address and UDP
port of a remote system log server.
If the selected mode is
Local
or
Both
, events will be recorded in the local memory.
Select the desired values and click
Save/Apply
button to configure the system log.
SNMP Agent
SNMP (Simple Network Management Protocol) provides a means to monitor status and
performance as well as set configuration parameters. It enables a management station to
configure, monitor and receive trap messages from network devices.
Note
: Do not change this information unless you are instructed to by your ISP technician.
Page 127 / 145
65xx-A1 Family Router Users Guide
127
TR-069 Client
The router includes a TR-069 client WAN management protocol with default values configured.
Note
: Do not change this information unless you are instructed to by your ISP technician.
To enable the TR-069 client protocol:
1.
Select
Enable
.
Page 128 / 145
65xx-A1 Family Router Users Guide
128
2.
Click on the
Save/Reboot
button for the change to take place.
Internet Time
Your router can synchronize its internal clock servers with servers running Network Time Protocol
(NTP).
1.
To enable NTP, click
Automatically synchronize with Internet time servers
and enter the
NTP settings.
2.
You may want to select a different NTP server or time zone.
3.
Click
Apply / Save
.
Page 129 / 145
65xx-A1 Family Router Users Guide
129
Access Control
You can enable or disable some services of your router by LAN or WAN. If no WAN connection is
defined, only the LAN side can be configured.
Note
: Do not change this information unless you are instructed to by your ISP technician.
Page 130 / 145
65xx-A1 Family Router Users Guide
130
Passwords
Access the
Passwords
screen under the
Access Control
section to change a password. Select
an account and enter the current password and the new password and then click on the
Save /
Apply
button.
Services
Services that can be enabled or disabled on the LAN/WAN are
•
FTP
•
HTTP
•
ICMP
•
SNMP
•
SSH
•
Telnet
•
TFTP
Note
: ICMP for the LAN is always enabled.
It cannot be disabled.
If the modem is in bridge
mode, the WAN ICMP is also always enabled and cannot be changed.
Note
: The WAN ICMP service can only be configured when the modem is in routed mode
(PPPoE or IPoE).
19216811.live