15xx-A1 Family Router Users Guide

101

2.

Click on the

Save/Reboot

button for the change to take place.

Internet Time

Your router can synchronize its internal clock servers with servers running Network Time Protocol

(NTP).

1.

To enable NTP, click

Automatically synchronize with Internet time servers

and enter the

NTP settings.

2.

You may want to select a different NTP server or time zone.

3.

Click

Apply / Save

.

15xx-A1 Family Router Users Guide

102

Access Control

You can enable or disable some services of your router by LAN or WAN. If no WAN connection is

defined, only the LAN side can be configured.

Note

: Do not change this information unless you are instructed to by your ISP technician.

Services

Services that can be enabled or disabled on the LAN/WAN are



FTP



HTTP



ICMP



SNMP



SSH



Telnet



TFTP.

15xx-A1 Family Router Users Guide

103

Passwords

Access the

Passwords

screen under the

Access Control

section to change a password. Select

an account and enter the current password and the new password and then click on the

Save /

Apply

button.

15xx-A1 Family Router Users Guide

104

IP Addresses

Web access to the router may be limited when Access Control Mode is enabled.

Note

: Do not change this information unless you are instructed to by your ISP technician. Adding

or changing the settings on this page may cause you to lose management access to the router.

To add the IP address to the IP address list:

1.

Click

Add

.

2.

In the

Add IP Addresses

screen, assign the IP address of the management station that is

permitted to access the local management services, in the

IP Address

text box.

3.

Enter the

Subnet Mask

.

4.

Click

Save / Apply

.

5.

In the

Access Control -- IP Address

screen, select the IP address then select

Enabled

to

enable Access Control Mode.

15xx-A1 Family Router Users Guide

105

Update Software

Note

: Do not perform this operation unless you are instructed to by your ISP technician.

If your ISP releases new software for your router, follow these steps to perform an upgrade:

1.

Obtain an updated software image file from your ISP.

2.

Enter the path to the image file location or click on the

Browse

button to locate the image

file.

3.

Click

Update Software

once (and only once) to upload the new image file.

Reboot

Clicking

Save/Reboot

saves all the configurations you have made, then reboots the router using

the new configuration information.