15xx-A1 Family Router Users Guide

96

Update Settings

To load a previously saved configuration file onto your router:

1.

From the

Settings

–

Update Settings

page, click

Browse

to find the file on your computer.

2.

Click

Update Settings

.

The router will restore settings and reboot to activate the restored settings.

Restore Default

Restore Default will delete all configuration changes you have made and restore the router to

factory default settings.

To restore the factory defaults:

1.

From the

Settings

–

Restore Default Settings

page click

Restore Default Settings

.

2.

Click

OK

when the pop-up window appears confirming that you want to restore factory

default settings to your router.

15xx-A1 Family Router Users Guide

97

The router will restore the default settings and reboot.

System Log

The System Log dialog allows you to view the System Log and configure the System Log options.

To view the System Log

click

View System Log

to check the log file.

Note

: Only configure this if you are instructed by your ISP technician during troubleshooting

sessions.

15xx-A1 Family Router Users Guide

98

The

System Log

page shows the date and time of the recorded event, which facility captured the

event, the severity of the event and a message which describes the event.

15xx-A1 Family Router Users Guide

99

Configure System Log

If the log is enabled, the system will log selected events based on their level. The log levels are



Emergency



Alert



Critical



Error



Warning



Notice



Informational



Debugging.

All events above or equal to the selected log level will be logged and displayed.

If the selected mode is

Remote

or

Both

, events will be sent to the specified IP address and UDP

port of a remote system log server.

If the selected mode is

Local

or

Both

, events will be recorded in the local memory.

Select the desired values and click

Save/Apply

button to configure the system log.

15xx-A1 Family Router Users Guide

100

SNMP Agent

SNMP (Simple Network Management Protocol) provides a means to monitor status and

performance as well as set configuration parameters. It enables a management station to

configure, monitor and receive trap messages from network devices.

Note

: Do not change this information unless you are instructed to by your ISP technician.

TR-069 Client

The router includes a TR-069 client WAN management protocol with default values configured.

Note

: Do not change this information unless you are instructed to by your ISP technician.

To enable the TR-069 client protocol:

1.

Select

Enable

.