Page 51 / 63 Scroll up to view Page 46 - 50
Manual Ver1.0
- 51 -
Figure 62. Management Utilities – System Log Configuration
Click on “View System Log” to see the router log based on your configuration
Page 52 / 63
Manual Ver1.0
- 52 -
7. Connection Status
7.1 - LAN
This page displays the status of packets transmitted and received on the M404/M405 LAN
interfaces.
Figure 63. Connection Status – LAN
7.2 - WAN
The WAN Connection Status is broken into 2 parts:
1.
Connection – Information concerning the WAN protocol currently in used by the
M404/M405 to connect to the Internet. In the figure below: The modem is
currently in PPPoE mode, IGMP option is disabled, No Quality of Service is used,
the PPPoE connection is Up and the WAN IP address that the modem receives
from the Internet Service Provider Equipment.
2.
Status –Information concerning Packets Received and Transmitted on the WAN
side based on the Protocol used by the M404/M405 (example shows PPPoE
connection).
Page 53 / 63
Manual Ver1.0
- 53 -
Figure 64
.
Connection Status – WAN Connection
Figure 65
.
Connection Status – WAN Status
Page 54 / 63
Manual Ver1.0
- 54 -
7.3 - ATM
This page displays the statistics of M404/M405 ATM interface (including AAL5).
Figure 66. Connection Status – ATM
7.4 - ADSL
This page displays the M404/M405 ADSL connection information and status, such as Rate
(Kbps), SNR, ES (Error Second)…etc. This information is useful when there are problems
with your ADSL connection (The M404/M405 DSL LED light does not stay solid for
example)
Page 55 / 63
Manual Ver1.0
- 55 -
Figure 67. Connection Status – ADSL
7.5 - Route
This page displays the M404/M405 routing table.

Rate

4.5 / 5 based on 2 votes.

Popular VisionNet Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top