USRobotics USR9110 Router Manual PDF (Setup & Configuration Guide)

Page 21 / 92 Scroll up to view Page 16 - 20

S

ETUP

W

IZARD

19

5. Confirm your settings

The Confirm page shows a summary of the configuration parameters.

Make sure the parameters for ADSL operation mode (WAN), Network

Layer Parameters (WAN), DHCP, and/or ISP parameters are correct

(see the following example).

Parameter

Description

ADSL Operation Mode

(WAN)

ISP

The type of ISP you have selected.

Protocol

Indicates the protocol used.

VPI/VCI

Virtual Path Identifier (VPI) and Virtual Circuit Identifier

(VCI).

AAL5 Encapsulation

Shows the packet encapsulation type. See the “WAN”

section later in this chapter for more information on

encapsulation.

Network Layer

Parameters (WAN)

IP Address

WAN IP address.

Subnet Mask

WAN subnet mask.

Default Gateway

WAN gateway.

Page 22 / 92

C

ONFIGURING

THE

W

IRELESS

54M

BPS

ADSL R

OUTER

20

If all the information is correct, click

Wizard. You should now have Internet access. If any of the

information is not correct, click

BACK

to get to the appropriate

screen, modify the information, and then continue the configuration.

The information you supplied will be saved and the main screen of

the Web User Interface will appear.

If at any time you want to validate your Internet settings, click

Status

.

Advanced Setup

Click

Home

in the upper right-hand corner. The left-hand side of the

page displays the main menu and the right-hand side shows

descriptive information.

DHCP Parameters

Function

Shows the DHCP function is enabled or disabled.

Default Gateway

LAN IP address of the Wireless 54Mbps ADSL Router.

Subnet Mask

The network subnet mask.

Name Server 1

Primary DNS server IP address.

Name Server 2

Alternate DNS server IP address.

Start IP Address

Start IP address of DHCP pool of assigned IP addresses.

Number of IP

Number of IP addresses available for assignment by the

DHCP server.

Parameter

Description

Page 23 / 92

A

DVANCED

S

ETUP

21

The following table describes the main menu items on the advanced

Web User Interface.

Menu

Description

SYSTEM

Sets the local time zone, the password for administrator access, and

the IP address of a PC or notebook that will be allowed to manage the

Wireless 54Mbps ADSL Router remotely.

WAN

Specifies the Internet connection settings.

LAN

Sets the TCP/IP configuration for the Wireless 54Mbps ADSL Router

LAN interface and DHCP clients.

WIRELESS

Configures the radio frequency, SSID, and security for wireless

communications.

NAT

Configures Address Mapping, virtual server and special applications.

ROUTING

Sets the routing parameters and displays the current routing table.

FIREWALL

Configures a variety of security and specialized functions including:

Access Control, URL blocking, Internet access control scheduling,

intruder detection, and DMZ.

SNMP

Community string and trap server settings.

UPnP

With Universal Plug and Play, a device can automatically join a

network, obtain an IP address, communicate its capabilities, and learn

about the presence and capabilities of other devices. Devices can then

directly communicate with each other. This further enables peer-to-

peer networking.

QoS

Allows you to optimize network quality by prioritizing data traffic.

ADSL

Sets the ADSL operation type and shows the ADSL status.

Page 24 / 92

C

ONFIGURING

THE

W

IRELESS

54M

BPS

ADSL R

OUTER

22

System

Time Settings

For accurate timing of log entries and system events, you need to set

the time zone. Select your time zone from the dropdown list.

If you want to automatically synchronize the Wireless 54Mbps ADSL

Router with a public time server, check the box to Enable Automatic

Time Server Maintenance. Configure two different time servers by

selecting a Primary Server and a Secondary Server.

DDNS

Dynamic DNS provides users on the Internet with a method to tie their

domain name to a computer or server.

TOOLS

Contains options to backup & restore the current configuration, restore

all configuration settings to the factory defaults, update system

firmware, or reset the system.

STATUS

Provides WAN connection type and status, firmware and hardware

version numbers, system IP settings, as well as DHCP, NAT, and firewall

information. Displays the number of attached clients, the firmware

versions, the physical MAC address for each media interface, and the

hardware version and serial number. Shows the security and DHCP

client log.

Menu

Description

Page 25 / 92

A

DVANCED

S

ETUP

23

Password Settings

Use this page to change the password for accessing the Web User

Interface of the Wireless 54Mbps ADSL Router.

Passwords can contain from 3~12 alphanumeric characters and are

case-sensitive.

Note:

If you lost the password, or you cannot gain access to the

Web User Interface, press in and hold the reset button on the

rear panel for at least five seconds to restore the factory defaults. By

default, there is no password to log in to the Web User Interface.

Enter a maximum Idle Time Out (in minutes) to define a maximum

period of time for which the login session is maintained during

inactivity. If the connection is inactive for longer than the maximum

idle time, it will perform a system logout and you will have to log in

again to access the Web User Interface. The default is 10 minutes.

Remote Management

By default, management access is only available to users on your

local network. However, you can also manage the Wireless 54Mbps

ADSL Router from a remote host by entering the IP address of a

remote computer on this screen. Select the

Enabled

checkbox, enter

Rate

Popular USRobotics Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share