Page 36 / 92
Scroll up to view Page 31 - 35
C
ONFIGURING
THE
W
IRELESS
54M
BPS
ADSL R
OUTER
34
802.1X
If 802.1x is used in your network, then you should enable this
function for the Wireless 54Mbps ADSL Router. These parameters are
used for the Wireless 54Mbps ADSL Router to connect to the
authentication server.
Parameter
Description
802.1X
Authentication
Enable or disable this authentication function.
Session Idle timeout Defines a maximum period of time for which the connection is
maintained during inactivity.
Re-Authentication
Period
Defines a maximum period of time for which the authentication
server will dynamically re-assign a session key to a connected
client.
Quiet Period
Defines a maximum period of time for which the Wireless 54Mbps
ADSL Router will wait between failed authentications.
Server Type
RADIUS authentication server.
RADIUS Server Parameters
Server IP
The IP address of your authentication server.
Server Port
The port used for the authentication service.
Secret Key
The secret key shared between the authentication server and its
clients.
NAS-ID
Defines the request identifier of the Network Access Server.
Page 37 / 92
A
DVANCED
S
ETUP
35
NAT
Network Address Translation allows multiple users to access the
Internet, while sharing only one public IP.
Address Mapping
Allows one or more public IP addresses to be shared by multiple
internal users. This also hides the internal network for increased
privacy and security. Enter the Public IP address that you wish to
share into the Global IP field. In the
from
field, enter a range of
internal IPs that will share the global IP.
Page 38 / 92
C
ONFIGURING
THE
W
IRELESS
54M
BPS
ADSL R
OUTER
36
Virtual Server
If you configure the Wireless 54Mbps ADSL Router as a virtual server,
remote users accessing services such as the Internet or FTP at your
local site via public IP addresses can be automatically redirected to
local servers with private IP addresses. In other words, depending on
the requested service (TCP/UDP port number), the Wireless 54Mbps
ADSL Router redirects the external service request to the appropriate
server (located at another internal IP address).
For example, if you set Type/Public Port to TCP/80 (HTTP or Web) and
the Private IP/Port to 192.168.2.2/80, then all HTTP requests from
outside users will be transferred to 192.168.2.2 on port 80. Therefore,
by just entering the IP address provided by the ISP, Internet users can
access the service they need at the local address to which you
redirect them.
A list of ports is maintained at the following link:
Page 39 / 92
A
DVANCED
S
ETUP
37
Special Applications
Some applications require multiple
connections, such as Internet gaming,
video-conferencing, and Internet
telephony. These applications may not
work when Network Address Translation
(NAT) is enabled. If you need to run applications that require multiple
connections, use these pages to specify the additional public ports to
be opened for each application.
Page 40 / 92
C
ONFIGURING
THE
W
IRELESS
54M
BPS
ADSL R
OUTER
38
NAT Mapping Table
This page displays the current NAPT (Network Address Port
Translation) address mappings.
Routing
These pages define routing related parameters, including static
routes and RIP (Routing Information Protocol) parameters.
Static Route
Click
Add
to add a new static route to the list.
Parameter
Description
Network Address
Enter the IP address of the remote computer for which to set
a static route.
19216811.live