S
ETUP
W
IZARD
11
Click
NEXT
to continue.
4. Enter your Parameter Settings
Select the country of your Internet Service Provider (ISP) and the
name or type of your ISP. This will automatically configure the
Wireless 54Mbps ADSL Router with the correct Protocol,
Encapsulation and VPI/VCI settings for your ISP.
If your Country or Internet Service Provider is not listed, you will need
to manually enter the settings. Go to “Parameter Setting - Country or
ISP Not Listed” in this manual for more information. (It appears later
in this document.)
If your ISP uses PPPoA or PPPoE, then you will need to enter the
username, password and DNS Server address supplied by your ISP.
If your ISP uses 1483 Routing, then you will need to enter the IP
Wireless Mode
This device supports both 11g and 11b wireless networks. Make
your selection depending on the type of wireless network that you
have.
Security Type
For Security, you can select either
No WEP, No WPA
;
WEP Only
; or
WPA Only
. If you select WEP or WPA, you will need to enter either
a Pass phrase or a Key on the next page.
Channel
The radio channel used by the wireless router and its clients to
communicate with each other. This channel must be the same on
the Wireless 54Mbps ADSL Router and all of its wireless clients.
The Wireless 54Mbps ADSL Router will automatically assign itself
a radio channel, or you may select one manually.
Parameter
Description
19216811.live