Page 6 / 92
Scroll up to view Page 1 - 5
I
NSTALLATION
4
microfilter has a connection for both the router and the phone.
Step Two: Connect your Wireless 54Mbps ADSL Router to the wall phone
jack
•
Turn off your computer.
•
Connect one end of the included phone cable to the ADSL port on the
Wireless 54Mbps ADSL Router. Connect the other end of the phone cable
to a wall phone jack.
Step Three: Connect your Wireless 54Mbps ADSL Router to your computer
and connect the power supply
Connect one end of the supplied Ethernet cable to your computer’s Ether-
net adapter. Connect the other end to the LAN port on the Wireless 54Mbps
Page 7 / 92
5
ADSL Router.
Connect the included power adapter to the power socket on the Wireless
54Mbps ADSL Router. Plug the power adapter into a standard power outlet.
Turn on your computer.
’
Proceed to Chapter 2 to configure the Wireless 54Mbps ADSL Router.
Page 9 / 92
7
C
HAPTER
2
C
ONFIGURING
THE
W
IRELESS
54M
BPS
ADSL R
OUTER
To access the Wireless 54Mbps ADSL
Router’s Web User Interface, launch a Web
browser and type the default IP address of
the Wireless 54Mbps ADSL Router in
address line:
.
By default, there is no password, so click
LOGIN
to access the Web
User Interface.
If you are logging in to the Web User Interface for the first time, the
country selection page will appear. Please select the country in which
you will be using the Wireless 54Mbps ADSL Router and then click
Apply
. Then confirm your country selection by clicking
OK
.
Page 10 / 92
C
ONFIGURING
THE
W
IRELESS
54M
BPS
ADSL R
OUTER
8
Navigating the Web User Interface
This is the advanced setup page:
Setup Wizard: Use the Setup Wizard if you want to quickly set up the
Wireless 54Mbps ADSL Router. Go to “Setup Wizard” on page 9.
Advanced Setup: Advanced Setup supports more advanced functions
like hacker attack detection, IP and MAC address filtering, virtual
server setup, QoS, as well as other functions. Go to “Advanced
Setup” on page 20.
Making Configuration Changes
Configurable parameters have a text box or a drop-down list. Once a
configuration change has been made on a page, click
SAVE SETTINGS
or
NEXT
at the bottom of the page to enable the new setting.
Note:
To ensure the screen refreshes after a command entry, be
sure that Internet Explorer is configured as follows: Click
Tools
,
Internet Options
,
General
,
Temporary Internet Files
, and
Settings
.
The setting for Check for newer versions of stored pages should be
Every visit to the page
.
19216811.live