1. Home
    2. /
  2. Manuals
    3. /
  3. USRobotics
    4. /
  4. USR9110
    5. /
  5. 13
Page 61 / 92 Scroll up to view Page 56 - 60
A
DVANCED
S
ETUP
59
Reset
Click
REBOOT ROUTER
to reset the Wireless 54Mbps ADSL Router.
If you perform a reset from this page, the configurations will not be
changed back to the factory default settings.
Note:
If you press the Reset button on the rear panel for one to
two seconds,
the Wireless 54Mbps ADSL Router will perform a
power reset. Press the button for over five seconds and the factory
default settings will be restored.
Page 62 / 92
C
ONFIGURING
THE
W
IRELESS
54M
BPS
ADSL R
OUTER
60
Status
The Status page displays WAN/LAN connection status, firmware, and
hardware version numbers, and illegal attempts to access your
network, as well as information on DHCP clients connected to your
network. The security log may be saved to a file by clicking
Save
and
choosing a location.
Page 63 / 92
A
DVANCED
S
ETUP
61
The following items are included on the Status page:
Parameter
Description
INTERNET
Displays WAN connection type and status.
GATEWAY
Displays system IP settings, as well as DHCP Server and Firewall
status.
INFORMATION
Displays the number of attached clients, the firmware versions,
the physical MAC address for each media interface and for the
Wireless 54Mbps ADSL Router, as well as the hardware version
and serial number.
ATM PVC
Displays ATM connection type and status.
Disconnect
Click on this button to disconnect from the ATM connection.
Connect
Click on this button to establish a connection to the ATM
connection.
Security Log
Displays illegal attempts to access your network.
Save
Click on this button to save the security log file.
Clear
Click on this button to delete the access log.
Refresh
Click on this button to refresh the screen.
DHCP Client Log
Displays information on DHCP clients on your network.
Page 64 / 92
C
ONFIGURING
THE
W
IRELESS
54M
BPS
ADSL R
OUTER
62
Page 65 / 92
63
A
PPENDIX
A
T
ROUBLESHOOTING
This section describes common problems you may encounter and
possible solutions to them. The ADSL Router can be easily monitored
through panel indicators to identify problems.
The Power LED is not illuminated.
Possible Solution
Check connections between the ADSL Router, the external power
supply, and the wall outlet.
Possible Solution
If the power indicator does not turn on when the power cord is
plugged in, you may have a problem with the power outlet, power
cord, or external power supply. However, if the unit powers off after
running for a while, check for loose power connections, power losses,
or surges at the power outlet.
If you still cannot isolate the problem, then the external power supply
may be defective. In this case, contact Technical Support for
assistance.
The Link LED is not illuminated.
Possible Solution
Verify that the ADSL Router and attached device are powered on.
Be sure the cable is plugged into both the ADSL Router and the
corresponding device.
Possible Solution
Verify that the proper cable type is used and that its length does not

Rate

4 / 5 based on 2 votes.

Popular USRobotics Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top