1. Home
    2. /
  2. Manuals
    3. /
  3. Ubee
    4. /
  4. DVW32CB
    5. /
  5. 6
Page 26 / 114 Scroll up to view Page 21 - 25
Ubee Interactive
Using the Connection Option
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide
•
January 2015
22
4.2
Using the Connection Option
The
Connection
screen displays information about the device’s connection status and
downstream and upstream channel bonding statistics.
Downstream
displays detailed information on the network traffic from the service
provider
to
the local computer (downstream channels).
Upstream
displays detailed information on the network traffic
from
the computer
to the remote destination (upstream channels).
Label
Description
Information
Standard Specification Compliant
Defines the current DOCSIS standard supported by the
DVW32CB.
Hardware Version
Defines the internal version number that identifies the
hardware design.
Software Version
Defines the firmware version of the device.
Cable Modem MAC Address
Defines the unique media access control (MAC) hardware
address of the DVW32CB.
Cable Modem Serial Number
Defines the unique manufacturer serial number of the device.
CM certificate
Indicates if the cable modem certificate is installed.
Status
System Up Time
Displays how long the device has been connected.
Network Access
Defines if network access is enabled. When enabled, the
user is allowed to access the network.
Cable Modem IP Address
Displays the IP address for the cable modem.
Page 27 / 114
Ubee Interactive
Using the Connection Option
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide
•
January 2015
23
Steps
To view connection information:
1.
Click
Status
from the main menu.
2. Click
Connection
from the left side menu. Field descriptions are listed below the
screen example.
Page 28 / 114
Ubee Interactive
Using the Connection Option
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide
•
January 2015
24
Label
Description
Startup Procedure: (Procedure, Status, Comment)
Acquire Downstream Channel
Displays the Downstream channel status and if the device has
locked to a channel.
Connectivity State
Displays connection status and if the DVW32CB is
operational.
Boot State
Displays the status on boot up and if the device is operational.
Configuration File
Provides the status and file name of the configuration file
currently used by the DVW32CB.
Security
Displays the status of the security settings: enabled/disabled.
Downstream Bonded Channels
Channel
Numbers the downstream channels.
Lock Status
Displays if the device has locked successfully to a
downstream channel.
Modulation
Displays the modulation method required for the downstream
channel to lock on to by device. This method is determined by
the service provider.
Channel ID
Displays the downstream channel ID.
Frequency
Displays the downstream channel frequency on which the
DVW32CB is scanning.
Power
Displays the receiver power level in decibel millivolts (dBmV)
after ranging process.
SNR
Displays the signal-to-noise ratio, the desired signal level to
the background noise level.
Correctables
Displays the quantity of codewords which are correctable.
Uncorrectables
Displays the quantity of codewords which are not correctable.
Upstream Bonded Channels
Channel
Numbers the upstream channels.
Lock Status
Displays if the device has locked successfully to an upstream
channel.
US Channel Type
Displays the channel type.
Channel ID
Displays the current upstream channel ID.
Symbol Rate
Displays the symbol rate in 1000 symbols per second.
Frequency
Displays the current upstream frequency in hertz.
Power
Displays the current upstream transmit power in decibel
millivolts (dBmV).
CM IP Address
Displays the DVW32CB’s IP address.
Page 29 / 114
Ubee Interactive
Using the Account Option
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide
•
January 2015
25
4.3
Using the Account Option
Use the
Account
option to change the username and password.
Steps
To reset the DVW32CB’s username and password:
1.
Click
Status
from the main menu.
2. Click
Account
from the left side menu. Field descriptions are listed below the screen
example.
4.4
Using the Diagnostics Option
Use the
Diagnostics
option to test network connectivity. Two utilities are available: Ping
and Traceroute.
Duration
Displays the time the device has been active.
Expires
Displays when the cable modem’s certificate expires.
Current System Time
Displays the current system time.
Label
Description
User
User Name
Enter the new User name.
New Password
Enter the new User password.
Confirm Password
Confirm the new User password.
Apply
Saves the changes.
Label
Description
Page 30 / 114
Ubee Interactive
Using the Diagnostics Option
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide
•
January 2015
26
Topics
See the following topics:
Using the Ping Option on page 26
Using the Traceroute Option on page 27
4.4.1
Using the Ping Option
Use the
Ping
utility to test network connectivity between devices by sending a test
message to a specific device. You can also confirm the size of data sent is the same as
the size of data received.
Steps
To test connectivity between devices:
1.
Click
Status
from main menu.
1.
Click
Diagnostics
from the left side menu.
2. Choose
Ping
from the Utility drop-down menu.
3. Enter new parameter values or accept the default values.
4. Click
Start Test
. Field descriptions are listed below the screen example.

Rate

4 / 5 based on 1 vote.

Popular Ubee Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top