Given below is full router user manual of TRENDnet TWG-BRF114 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 9
Table of Contents
Version 08.30.2007
English
......................................................................................................
Troubleshooting
........................................................................................
1
1
2
3
5
1. Before You Start
2. Hardware Installation
.........................................................................
3.
.................................................................................
Configure the Router
.........................................................................
Page 3 / 9
Installation Requirements
Application
Package Contents
1. Before You Start
English
1
?
?
?
User's Guide CD-ROM
?
1 x RJ-45 Ethernet Cable
?
Power Adapter (12V, 800mA)
T
Quick Installation Guide
WG-BRF114
?
?
Web Browser: Internet Explorer (5.0 or higher) or Netscape
Navigator (4.7 or higher)
?
Broadband Internet
?
Installed Cable or DSL Modem
A computer with a wired network adapter properly installed.
Cable/DSL 4-Port Gigabit Firewall Router
(TWG-BRF114)
Workstation with
Gigabit PCI Adapter
(TEG-PCIWN)
Wireless Access Point
(TEW-630APB)
Notebook with
(TEG-PCBUSR)
PC Card
Cable/DSL
Modem
1-Port 10/100Mbps Multi-Function
USB 2.0 Print Server
(TE100-MP1U)
Internet
Gigabit
10/100Mbps
Page 4 / 9
English
2
2. Hardware Installation
4.
Connect the AC Power Adapter to
the TWG-BRF114 and then to a
power outlet.
5.
Verify that the following panel lights
are on:
Power, LAN and WAN.
Note: Gather all information related to your Internet Connection before you
start.
If necessary, contact your Internet Service Provider (ISP).
1.
Verify that you have an Internet
connection when connecting your
computer directly to the Cable or
DSL modem.
Cable/DSL Modem
Internet
2.
Connect one end of a RJ-45 cable
to the TWG-BRF114's WAN
port.
Connect the other end of the
cable to your modem.
3.
Connect one end of a RJ-45 cable
to one of the TWG-BRF114's
LAN ports.
Connect the other end
of the cable to the computer's
Ethernet port.
Page 5 / 9
English
3
3. Configure the Router
1.
Open your web browser, type
in the
Address bar, and press
Enter
.
4.
Select the type of Internet access
that you have and then click
Next.
2.
Click
Setup Wizard.
3.
Click
Next.
19216811.live