PC Configuration

23

Figure 15 - Windows NT4.0 - Add Gateway

2.

The DNS should be set to the address provided by your ISP, as follows:

•

Click the DNS tab.

•

On the DNS screen, shown below, click the

Add

button (under

DNS Service Search

Order

), and enter the DNS provided by your ISP.

TW100-BRV304 User Guide

24

Figure 16: Windows NT4.0 - DNS

PC Configuration

25

Checking TCP/IP Settings - Windows 2000:

1.

Select

Control Panel - Network and Dial-up Connection

.

2.

Right - click the

Local Area Connection

icon and select

Properties

. You should see a

screen like the following:

Figure 17: Network Configuration (Win 2000)

3.

Select the

TCP/IP

protocol for your network card.

4.

Click on the

Properties

button. You should then see a screen like the following.

TW100-BRV304 User Guide

26

Figure 18: TCP/IP Properties (Win 2000)

5.

Ensure your TCP/IP settings are correct, as described below.

Using DHCP

To use DHCP, select the radio button

Obtain an IP Address automatically

. This is the default

Windows setting.

Using this is recommended

. By default, the TW100-BRV304 will act as a

DHCP Server.

Restart your PC to ensure it obtains an IP Address from the TW100-BRV304.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured, check with your network administrator before making the

following changes.

•

Enter the TW100-BRV304 's IP address in the

Default gateway

field and click

OK

. (Your

LAN administrator can advise you of the IP Address they assigned to the TW100-

BRV304.)

•

If the

DNS Server

fields are empty, select

Use the following DNS server addresses

, and

enter the DNS address or addresses provided by your ISP, then click

OK

.

PC Configuration

27

Checking TCP/IP Settings - Windows XP

1.

Select

Control Panel - Network Connection

.

2.

Right click the

Local Area Connection

and choose

Properties

. You should see a screen

like the following:

Figure 19: Network Configuration (Windows XP)

3.

Select the

TCP/IP

protocol for your network card.

4.

Click on the

Properties

button. You should then see a screen like the following.