Page 21 / 123 Scroll up to view Page 16 - 20
18
Chapter 4
PC Configuration
This Chapter details the PC Configuration required on the local ("Internal")
LAN.
Overview
For each PC, the following may need to be configured:
TCP/IP network settings
Internet Access configuration
Windows Clients
This section describes how to configure Windows clients for Internet access via the TW100-
BRV304.
The first step is to check the PC's TCP/IP settings.
The TW100-BRV304 uses the TCP/IP network protocol for all functions, so it is essential that
the TCP/IP protocol be installed and configured on each PC.
TCP/IP Settings - Overview
If using the default TW100-BRV304 settings, and the default Windows
TCP/IP settings, no changes need to be made.
By default, the TW100-BRV304 will act as a DHCP Server, automatically providing a
suitable IP Address (and related information) to each PC when the PC boots.
For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP
client.
If using a Fixed (specified) IP address, the following changes are re-
quired:
The
Gateway
must be set to the IP address of the TW100-BRV304
The
DNS
should be set to the address provided by your ISP.
4
Page 22 / 123
PC Configuration
19
Checking TCP/IP Settings - Windows 9x/ME:
3.
Select
Control Panel - Network
. You should see a screen like the following:
Figure 9: Network Configuration
4.
Select the
TCP/IP
protocol for your network card.
5.
Click on the
Properties
button. You should then see a screen like the following.
Figure 10: IP Address (Win 95)
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button
Obtain an IP Address automatically
. This is the default
Windows setting.
Using this is recommended
. By default, the TW100-BRV304 will act as a
DHCP Server.
Restart your PC to ensure it obtains an IP Address from the TW100-BRV304.
Using "Specify an IP Address"
If your PC is already configured, check with your network administrator before making the
following changes:
Page 23 / 123
TW100-BRV304 User Guide
20
On the
Gateway
tab, enter the TW100-BRV304 's IP address in the
New Gateway
field
and click
Add
, as shown below. Your LAN administrator can advise you of the IP Address
they assigned to the TW100-BRV304.
Figure 11: Gateway Tab (Win 95/98)
On the
DNS Configuration
tab, ensure
Enable DNS
is selected. If the
DNS Server Search
Order
list is empty, enter the DNS address provided by your ISP in the fields beside the
Add
button, then click
Add
.
Figure 12: DNS Tab (Win 95/98)
Page 24 / 123
PC Configuration
21
Checking TCP/IP Settings - Windows NT4.0
1.
Select
Control Panel - Network
, and, on the
Protocols
tab, select the TCP/IP protocol, as
shown below.
Figure 13: Windows NT4.0 - TCP/IP
2.
Click the
Properties
button to see a screen like the one below.
Page 25 / 123
TW100-BRV304 User Guide
22
Figure 14: Windows NT4.0 - IP Address
3.
Select the network card for your LAN.
4.
Select the appropriate radio button -
Obtain an IP address from a DHCP Server
or
Specify
an IP Address
, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting.
Using this is recommended
. By default, the TW100-
BRV304 will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the TW100-BRV304.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1.
The
Default Gateway
must be set to the IP address of the TW100-BRV304. To set this:
Click the
Advanced
button on the screen above.
On the following screen, click the
Add
button in the
Gateways
panel, and enter the
TW100-BRV304 's IP address, as shown in Figure 15 below.
If necessary, use the
Up
button to make the TW100-BRV304 the first entry in the
Gateways
list.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top