Page 26 / 123 Scroll up to view Page 21 - 25
PC Configuration
23
Figure 14: Windows NT4.0 - IP Address
3.
Select the network card for your LAN.
4.
Select the appropriate radio button -
Obtain an IP address from a DHCP Server
or
Specify
an IP Address
, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting.
Using this is recommended
. By default, the TW100-
BRV204 will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the TW100-BRV204.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1.
The
Default Gateway
must be set to the IP address of the TW100-BRV204. To set this:
Click the
Advanced
button on the screen above.
On the following screen, click the
Add
button in the
Gateways
panel, and enter the
TW100-BRV204 's IP address, as shown in Figure 15 below.
If necessary, use the
Up
button to make the TW100-BRV204 the first entry in the
Gateways
list.
Page 27 / 123
TW100-BRV204 User Guide
24
Figure 15 - Windows NT4.0 - Add Gateway
2.
The DNS should be set to the address provided by your ISP, as follows:
Click the DNS tab.
On the DNS screen, shown below, click the
Add
button (under
DNS Service Search
Order
), and enter the DNS provided by your ISP.
Page 28 / 123
PC Configuration
25
Figure 16: Windows NT4.0 - DNS
Page 29 / 123
TW100-BRV204 User Guide
26
Checking TCP/IP Settings - Windows 2000:
1.
Select
Control Panel - Network and Dial-up Connection
.
2.
Right - click the
Local Area Connection
icon and select
Properties
. You should see a
screen like the following:
Figure 17: Network Configuration (Win 2000)
3.
Select the
TCP/IP
protocol for your network card.
4.
Click on the
Properties
button. You should then see a screen like the following.
Page 30 / 123
PC Configuration
27
Figure 18: TCP/IP Properties (Win 2000)
5.
Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select the radio button
Obtain an IP Address automatically
. This is the default
Windows setting.
Using this is recommended
. By default, the TW100-BRV204 will act as a
DHCP Server.
Restart your PC to ensure it obtains an IP Address from the TW100-BRV204.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
Enter the TW100-BRV204 's IP address in the
Default gateway
field and click
OK
. (Your
LAN administrator can advise you of the IP Address they assigned to the TW100-
BRV204.)
If the
DNS Server
fields are empty, select
Use the following DNS server addresses
, and
enter the DNS address or addresses provided by your ISP, then click
OK
.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top