TRENDnet TVP-224HR Router Manual PDF (Setup & Configuration Guide)

Page 6 / 29 Scroll up to view Page 1 - 5

4

English

The TVP-224HR comes with default LAN IP addresses “192.168.0.1”. The

TVP-224HR DHCP server is always enabled, and by default assigns 30 IP

addresses starting from 192.168.0.10. You may use any PC to connect to the

LAN port of TVP-224HR, and then follow the steps below:

1.

Start your WEB browser. In the address field, Type in the following address

http://192.168.0.1.

2.

The pop-up screen should appear and prompt for user name and password.

The default values are:

User name:

admin

(all lower case)

Password:

123

3.

The following TVP-224HR VoIP Gateway Router Graphical User Interface

main page should appear. If connection fails, check all cable connections

between the Cable / ADSL Modem and TVP-224HR.

4. Configuration

Page 7 / 29

5

English

Connection Type

Data required

Fixed IP (Static)

Fixed IP Address, Subnet Mask, Default

Gateway and Primary DNS (Secondary

DNS is optional).

PPPoE

Login name and password (Service Name

is optional)

DHCP

Usually, none. But some ISP may require a

particular Hostname, Domain name, or MAC

(physical) address.

The following set-up information is designed to help you set-up your gateway to

connect to the Internet.

The set-up is different depending upon the type of

Internet Connection you have with your ISP (Fixed IP, PPPoE or DHCP). If

you're not sure what type of connection you have, please contact your Internet

Service Provider and collect the required information. Below is a table that

outlines the basic data you will require from your ISP.

Internet Access

After setting up Internet Access you will be able to Remote Manage the

Gateway using the WAN IP. By default the Web Access and Telnet

Access management are enabled. Both of these methods provide

access over the internet so they do pose a potential security risk. It is

recommended that once configuration is complete, both Web and Telnet

access are disabled for security reasons.

Turning of Web Access

disables access from the Internet; however, you will still have web

browser access from the LAN side from a computer in the same

segment. If you prefer leaving Web and / or Telnet access enabled, be

sure to change the administration password. In the event that you

should forget the password see section 6

Connection through Console.

Page 8 / 29

6

English

1.

From the Navigation Bar on the left side of the screen, Click

on the

Internet

Access

Option. From the Internet Access sub-menu, Select

Fixed IP

.

The Fixed IP Configuration page will appear.

2.

Enter all field information as provided by your ISP and Click

Save

.

3.

Reboot

the TVP-224HR system in order for the changes to take effect.

4.

Launch

your web browser, (Internet Explorer or Netscape Navigator)

Type

http://www.trendnet.com in the address bar, and hit the Enter key. If the

website appears, your router is configured correctly.

Static or Fixed IP Cable Connection

NOTE:

If the website does not appear, please verify that the information

is entered correctly. Also call your ISP and verify your connection type. If

you still can not establish Internet Access, please reference the trouble

shooting section of your user manual.

Page 9 / 29

7

English

1.

Click on the

Internet Access

option on the left-hand side of the screen and

Select

PPPoE

. The WAN PPPoE configuration page will appear.

PPPoE DSL Connection

2.

Enter PPPoE User Name and Password as provided by your ISP

.

3.

Click

Save

.

4.

Reboot

the TVP-224HR system in order for the changes to take effect.

5.

Launch

your web browser, (Internet Explorer or Netscape Navigator)

Type

http://www.trendnet.com in the address bar, and hit the Enter key. If the

website appears, your router is configured correctly.

6.

Setup DDNS Client (See section 7 on DDNS Client).

NOTE:

If the website does not appear, please verify that the information

is entered correctly. Also call your ISP and verify your connection type. If

you still can not establish Internet Access, please reference the trouble

shooting section of your user manual.

Page 10 / 29

8

English

1.

Click on the

Internet Access

option on the left-hand side of the screen and

Select

DHCP

. The WAN PPPoE configuration page will appear.

DHCP Connection

2.

Enable

DHCP

, and enter Hostname, Domain Name and / or WAN MAC

Address (To find the WAN MAC Address, please navigate to Home / System

Status page) if required by your ISP.

3.

Click

Save.

4. Reboot

the TVP-221H system in order for the changes to take effect.

5.

Launch your web Browser, (Internet Explorer or Netscape Navigator) Type

http://www.trendnet.com in the address bar, and hit the

Enter

key.

If the

website appears, your router is configured correctly.

6.

Setup DDNS Client (See section 7 on DDNS Client).

NOTE:

This quick guide covers only the most common situations.

Please refer to the User Guide (CD) for more information.

For console /

telnet configuration, please reference the Advanced User Guide (CD) for

more detailed information.

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share