Given below is full router user manual of TRENDnet TVP-224HR router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 29
Copyright ©2005.
All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
Version 07.25.05
4-port VoIP Gateway with 4-port Broadband Router
Quick Installation Guide
TVP-224HR
Page 2 / 29
Table of Contents
English
......................................................................................................
1
1
2
3
10
4
12
9
14
1. Prepare for Installation
......................................................................
2. Install Hardware
................................................................................
3. Configure the computer's TCP/IP Settings
........................................
4. Configuration
.....................................................................................
5. Connection through Telnet
.................................................................
6. Connection through Console
.............................................................
7. Dynamic DNS (Domain Name Server)
..............................................
8. Web Browser Dial Plan Sample
.........................................................
Page 3 / 29
Thank you for purchasing the TVP-224HR. This VoIP Gateway Router will
allow you to share your broadband Internet connection with wired 10/100Mbps
Fast Ethernet computers as well as integrate your existing analog / PBX phone
system for Internet telephone.
This guide will help you setup and configure your VoIP Gateway Router.
Following the installation instructions should be quick and easy. If you run into
problems, please refer to the detailed installation procedures on the CD User's
Guide. If you need further technical support, please visit www.TRENDNET.com
or call by phone.
Verify Equipment
Before installing the VoIP Gateway Router you should have:
1.
A working DSL Internet connection with Static IP or Dynamic IP with
DDNS.
2.
Cable / DSL Modem
3.
A computer with wired network card installed.
4.
TCP/IP protocol installed on each wired computer.
5.
A Web Browser such as Internet Explorer (5.0 or higher) or Netscape
Navigator (4.7 or higher).
Verify Package Contents
Please make sure you have everything in the box:
1
TVP-224HR
CD-ROM
Quick Installation Guide
AC Power Adapter
RJ45 Ethernet (LAN) Cable
RS-232 Console Cable
English
1. Prepare for Installation
English QIG
TRENDnet
TVP-224HR
Page 4 / 29
2
English
2. Install Hardware
1
3
5
2
4
TVP-224HR
1.
Connect a RJ-45 network cable from Cable/ADSL Modem to TVP-224HR's
WAN port.
2.
Connect a RJ-45 network cable from one of the TVP-224HR's LAN ports to
PC.
3.
Connect Analog Phones/ Fax machine using RJ11 to FXS port(s).
4.
Connect FXO port(s) using RJ 11 Cable to PBX system or PSTN line.
5.
Power on your TVP-224HR.
Verify Hardware Installation
Make sure the following Router LEDs are on: Power, System (blinking), WAN,
LAN (100Mb/s or 10Mb/s Off)
WARNING:
Never connect a Trunk Line / PSTN line to a FXS Port. This
will result In permanent damage to the FXS port.
POWER
LINE
SYSTEM
LAN
WAN
Page 5 / 29
3
English
3. Configure the computer's TCP/IP Settings
To verify that your computer can communicate with your VoIP Gateway Router,
you need to configure the TCP/IP settings in your PC Operating System (OS).
Set up the PC to “Obtain an IP address automatically”. Detailed setup
procedures for Windows OS computers can be found in the User Manual on
the CD provided. If you are running any other OS please see your system
documentation for configuration information.
19216811.live