Page 6 / 13
Scroll up to view Page 1 - 5
English
4
6.
Enter the Admin ID and Password,
and then click
OK
.
By default:
User Name:
admin
Password:
admin
5.
Click
Yes
.
7.
If your network is on a different
subnet, an IP address in your
network's subnet will automatically
be generated.
If this IP address is
not
used by another device in your
network, click
OK
.
Page 7 / 13
8.
Enter the Admin ID and Password,
and then click
OK
.
By default:
Admin ID:
admin
Password:
admin
If you like to change the Admin ID
and password, click
Change
, enter
the New ID and the New Password
and confirm the New ID and News
Password.
Click on the right arrow
to continue.
9.
Click on the right arrow.
10.
Copy down the IP Address and
then click the restart button.
English
5
Page 8 / 13
11.
Open your web browser, type in
the IP address of the camera in
the Address bar, and then press
Enter
.
If you changed the IP
address of the camera, type in the
new IP address. By default, the IP
12.
Click
View Image – Active X
Mode
or
View Image – Java
Mode.
13.
Enter the Admin ID and
Password, and then click
OK
.
By default:
Admin ID:
admin
Password:
admin
Note: For detailed information regarding the TV-IP201P configuration and
advanced settings, please refer to the Troubleshooting section, User’s Guide
Your installation is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
English
6
Page 9 / 13
English
7
4. Power over Ethernet (PoE) Installation
Using the TV-IP201P with a PoE switch
2.
Verify that the LEDs are on.
Please refer to step 4 in the
Hardware Installation section.
1.
Connect a RJ-45 cable from the
Power over Ethernet Switch to the
LAN
port of the Internet Camera
Server.
Page 10 / 13
Using the TV-IP201P with an Injector (TPE-101I)
4.
Verify that the LEDs are on.
English
8
1.
Connect the
Power Cord
to the
Injector.
Then connect the
Power
Cord
to an outlet.
2.
Connect a CAT-5 cable from a
switch to the TPE-101I's
Data In
port.
3.
Connect a CAT-5 cable from the
TV-IP201P's
LAN
port to the
Injector's
PoE OUT
port
19216811.live