Given below is full router user manual of TRENDnet TV-IP201P router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 13
English
......................................................................................................
Troubleshooting
........................................................................................
1
1
3
2
7
9
1. Before You Start
2. Hardware Installation
........................................................................
3. Configure the Internet Camera
..........................................................
4. Power over Ethernet (PoE) Installation
.............................................
.................................................................................
Table of Contents
Version 06.08.2007
Page 3 / 13
System Requirements
Package Contents
1. Before You Start
English
1
?
?
?
TV-IP201P
Quick Installation Guide
Utility CD-ROM
?
Metal Stand
?
AC Power Adapter (5V, 2.5A)
?
?
?
?
?
?
?
?
CPU: 1.1GHz or above
Memory: 256MB or above / 512MB RAM or above (Windows Vista)
VGA resolution: 800 x 600 or above
Web Browser: Internet Explorer (5.0 or higher) or FireFox
A network Switch or Hub with an available network LAN port.
A RJ-45 network cable.
Power over Ethernet (PoE) Switch
(e.g. TPE-S88)(Optional)
Injector (e.g TPE-101I )(Optional)
Application
16-Port 10/100Mbps Web Smart
PoE Switch (TPE-S88)
Power + Data
(PoE)
Workstation
Router/Modem
16-Port 10/100Mbps Fast
Ethernet Switch (TE100-S16)
PoE Internet Camera Server
with Audio
(TV-IP201P)
Power over Ethernet
(PoE) Injector
(TPE-101I)
Internet
Power + Data
(PoE)
Power
Jack
Data
Data
Data
Power
Data
Power
Data
Data + Power
Page 4 / 13
2. Hardware Installation
English
2
1.
Mount the Internet Camera to the
metal stand.
2.
Connect a RJ-45 network cable
from a Switch/Router to the
LAN
port of the Internet Camera.
3.
Connect the AC Power Adapter to
the Internet Camera and then to a
power outlet.
4.
Verify that the Power and Link
lights are on.
Page 5 / 13
English
3
1.
Insert the Utility CD-ROM into your
CD-ROM drive and then click
Setup Wizard
.
3. Configure the Internet Camera
Note: Since the Internet Camera's default IP address is
192.168.0.30 , make
sure no other network devices are assigned an IP address of
192.168.0.30 3.
Go to
Start -> Programs -> Setup
Wizard
and click
SetupWizard
.
2.
Follow the
InstallShield Wizard
instructions and then click
Finish
.
4.
Select the camera and then click
Wizard
.
19216811.live