Page 86 / 135
Scroll up to view Page 81 - 85
85
Contain commands for setting the camera’s time and date to
provide correct time information to users who might be thousands
of miles away in the remote site by selecting
Synchronized with
Time Server
or
Set Manually.
Please refer to the Web
Configuration
section
under
“System
Administration
–
TimeDate”
for further details.
Trigger 1
Contains commands for setting the I/O Trigger connectors
providing the physical interface for 1 digital output and 1 digital
input that is used for connecting a diversity of external alarm
devices to the camera such as IR-Sensor and alarm relay.
Please
Page 87 / 135
86
refer
to
the
Web
Configuration
section
under
“System
Administration – Trigger”
for further details.
Trigger 2
Contains commands for setting the I/O Trigger connectors
providing the physical interface for 1 digital output and 1 digital
input that is used for connecting a diversity of external alarm
devices to the camera such as IR-Sensor and alarm relay.
Please
Page 88 / 135
87
refer
to
the
Web
Configuration
section
under
“System
Administration – Trigger”
for further details.
Information
Displays information about the camera such as the model,
firmware version, MAC address, and IP address.
Please refer to
the Web Configuration section under
“System Administration –
Information”
for further details.
Page 89 / 135
88
Tools
Contains commands for reset the camera and update firmware
(please refer to the appendix for detailed information).
Please
refer
to
the
Web
Configuration
section
under
“System
Administration – Tools”
for further details on reset.
Page 90 / 135
89
Make sure to save any changes you have made to keep the
information updated.
Note:
Alternatively you can click the
Property
icon
as illustrated
or use the hot key
“F2”
.
Menu Bar
The menu bar provides easier access for users to navigate the
IPView with different selections along with hot key capabilities
as follows:
19216811.live