Page 76 / 135
Scroll up to view Page 71 - 75
75
Alternatively you can click the
Delete
icon
as illustrated or
use the hot key
“Del”
.
How to View a Camera
View Camera
From the menu bar select
“View”
>
“4 Cameras”
(other choices
are available in
1 Camera
,
9 Cameras
and
16 Cameras
viewing
format) and the viewing screen will appear with the video image.
Note:
The icon on the upper left corner of the screen will appear with
the camera number that is being displayed
To return to the IPView list view format, click on the icon located
on the upper left corner of the screen and a case sensitive menu
will appear.
Select
“List”
and the viewing image will return to
the list view format.
Page 77 / 135
76
Note 1:
A maximum of 16 cameras are available for viewing with the
IPView application.
Note 2:
Alternatively you can click the
1 Camera
icon
as illustrated
or use the hot key
“Ctrl+F3”
.
For
4 Cameras
,
9 Cameras
and
16 Cameras
click the respective icon or use the hot
key as follows
“Ctrl+F4”
,
“Ctrl+F5”
and
“Ctrl+F6”
.
To return
to list view format use the hot key
“Ctrl+F1”
.
How to Snap shot a Camera
Snap shot Camera
To snap shot a camera you must highlight the camera you wish to
snap shot from the list view format.
From the menu bar select
“Camera”
>
“Snap shot”.
A
Save Image
dialog box will
appear for you to save the snap shot picture.
A second alternative is from the viewing mode either 1, 4, 9, 16
cameras click on the icon located on the upper left corner of the
screen and a case sensitive menu will appear and select the
“Snap
shot”
icon.
A
Save Image
dialog box will appear for you to save
the snap shot picture.
Note:
Alternatively you can click the
Snap shot
icon
as illustrated
or use the hot key
“F5 ”
.
Page 78 / 135
77
How to Adjust the Property
Setting
Property Setting
“Property”
is initiated by selecting
“Camera”
>
“Property”
and a dialog box will appear allowing settings of Web
Configuration and upgrade firmware (Please refer to the appendix
for detailed information).
The
Camera Property
dialog box will
appear for you to select the desired options from the tab selections
to Configure the camera as shown below.
General
Allows settings for the camera name, location and administrator
information such as administrator ID and password.
Please refer
to the Web Configuration section under
“System Administration
– System”
for further details.
Page 79 / 135
78
IP Assignment
There are two options to select from the IP Assignment either
Manually Assign
or
Assign Automatically Using
.
Please refer
to the Web Configuration section under
“System Administration
– System”
for further details.
Page 80 / 135
79
DNS
DNS (Domain Name System) server is an Internet service that
translates domain names into IP addresses.
Enter at least one
DNS IP Address.
Please refer to the Web Configuration section
under
“System Administration – System”
for further details.
19216811.live