Page 6 / 13 Scroll up to view Page 1 - 5
English
4
3. Configure the Internet Camera
3.
Go to
Start -> Programs ->
TRENDnet -> IPSetup
and click
IPSetup.
4.
Select the Internet Camera and
click
Change IP
.
Note:
1. It is recommended that you configure the Internet Camera from a wired
computer.
2. If you would like to use SecurView software, please refer to the User's Guide
on the CD for more information.
1.
Insert the Utility CD-ROM into your
CD-ROM drive and then click
IP
Setup
.
2.
Follow the
Installation Wizard
instructions and then click
Close
.
Note:
By default, the IP setting on the TV-IP110/TV-IP110W is set to DHCP.
Please skip to step 8.
If you want to give the TV-IP110/TV-IP110W static IP
address, continue on to step 4.
Page 7 / 13
English
5
6.
Click
OK
and wait 30 seconds.
5.
Configure the IP address to be in
the same subnet as your network,
type in the
Administrator ID
and
Password
and click
Change
.
By
default:
ID:
admin
Password:
admin
7.
Click
OK.
8.
Double click the IP Camera to
access the browser configuration.
Page 8 / 13
11.
Click
Install
.
9.
Enter the User name and
Password, and then click
OK
.
User Name:
admin
Password:
admin
10.
Right click and select
Install
ActiveX Control
.
12.
Click
Setup
,
Network
and then
click
Wireless
. (TV-IP110W only)
English
6
Page 9 / 13
English
7
15.
Verify the Power and Link LEDs
are on.
14.
Disconnect the RJ-45 cable and
unplug the power.
Then plug the
power back in (TV-IP110W).
Note: The TV-IP110W will not work wirelessly until you disconnect the Ethernet
cable from the back of the camera.
13.
Click
Site Survey
.
Select your
wireless network. If encryption is
enabled, select the proper
Authentication
type, enter the
Pre-Shared Key and then click
Apply
. (Example shows WPA2-
PSK.
If your wireless network
does not support WPA, select
open or shared instead.
Contact
your network administrator for
more information) (TV-IP110W
only).
Page 10 / 13
English
8
16.
Click
Live View.
Note: For detailed information regarding the TV-IP110/
110W configuration
and advanced settings, please refer to the Troubleshooting section, User's
Guide on the Utility CD-ROM, or TRENDnet's website at
TV-IP
Your installation is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top