Page 76 / 127
Scroll up to view Page 71 - 75
75
Alternately, you can add a camera by entering the its IP address
directly:
4.
Select the
Input IP
tab.
5.
Enter the camera’s IP address (default: 192.168.1.30) and
Port (default: 80), and then click
Add Camera
.
6.
Click
Save
, and then click the
System Configuration
button to
return to View Window. The selected camera’s video will be
displayed now.
Enter the camera’s
IP address and Port.
Click the
Add
Camera
button.
The camera is added.
Page 77 / 127
76
Removing a Camera
To remove the camera from the list:
1.
S
elect the
camera
you want to remove.
2.
Click
Delete Camera
.
Page 78 / 127
77
Viewing a Camera
From the View Modes of the panel, you can select one-camera
mode or other modes to display your video. IPView Pro allows
a maximum of 16 cameras for viewing.
For example, if you use only one camera, select one-camera
mode (
), and the View Window will display the view as
figure 1
.
If there are four cameras, select four-camera mode (
),
and the View Window will display the view as
figure 2
.
Figure 1
Figure 2
Page 79 / 127
78
Recording Video
IPView Pro allows you to record the video clip and save it in your
computer through the following methods:
Manual Record
,
Schedule Record
, and
Motion Record
.
When you click the
Record
button and select
Manual Record
, it
will start recording. Click the button again to stop. If you select
Schedule Record
or
Motion Record
, the system will record the
video clip according to the settings in System Configuration.
Playing Recorded Video
The recorded video clips are saved in your computer, and can be
played using Windows Media Player. To start playback, simply
click the
Play
button on the panel, and the following dialog screen
will appear, allowing you to select the file to playback.
The folder that stores
the recorded file.
Select one file
to playback.
Page 80 / 127
79
Select the recorded file in the computer, and then click
OK
.
Configuring the System
Clicking the
System Configuration
button on the panel allows you
to configure the system settings, and the
System Configuration
Screen
will appear in the View Window as shown below. Once
configured, click
Save
to save the settings, and then click the
System Configuration
button again to exit configuration.
19216811.live