TRENDnet TV-IP100v2 Router Manual PDF (Setup & Configuration Guide)

Page 71 / 127 Scroll up to view Page 66 - 70

70

Getting Started

This section describes the User Interface of IPView Pro, with

detailed procedures for using the application.

To launch IPView Pro, click

Start

>

Programs

>

IPView Pro

>

IPView Pro

. The main screen will appear as below:

NOTE:

IPView Pro requires the system’s resolution setting up to 1024x768.

Please configure the resolution to 1024x768 or higher; otherwise, it may

shows incomplete screen when launching the program.

Page 72 / 127

71

Item Feature

NO.

Item

Description

1

Date/Time

Show current date/time.

2

Status Mode

Window

Show the camera’s status in this window.

Click the

Change Status Mode

button (

) on

the right lower corner of the window to change

the display mode:

Camera list mode

Camera information mode

3

View Window

Show the camera’s view in this window.

4

Connect/

Disconnect

Click to connect/disconnect the camera.

5

Rotate image

angle

Click to rotate the image shown in the View

Window.

6

Snapshot

Click to capture a still image from the View

Window.

7

Audio ON/OFF

Click to turn on/off the camera’s audio.

8

Zoom Mode

Click to zoom in/out the image in the View

Window.

Select the view mode from these buttons.

Show one camera in View Window.

9

View Mode

Buttons

Show four cameras in View Window.

Page 73 / 127

72

Show six cameras in View Window with

the first one as the major view.

Show eight cameras in View Window

with the first one as the major view.

Show nine cameras in View Window.

Show ten cameras in View Window with

the first two as the major views.

Show thirteen cameras in View Window

with the first one as the major view.

Show sixteen cameras in View Window.

Show the selected camera in full screen

view.

Enable displaying the video views in

circles.

10 Key Lock

Button

Click to lock/unlock the camera. When locked,

the user cannot operate any camera.

11 Power Button

Click to exit or minimize IPView Pro.

12 Record Button

Record video clip of the selected camera and

save it in the computer. The storage position can

be configured in System Configuration. When

you click the button, you can select

Manual

Record

,

Schedule Record

, or

Motion Record

.

13 Play Button

Play the recorded video file in the computer.

14 System

Configuration

Click to enter the System Configuration.

Page 74 / 127

73

Using IPView Pro

Adding a Camera

To add a camera:

1.

Click the

System Configuration

button to enter the System

Configuration.

If you are not sure of the camera’s IP address, you can click

Search

to search the available camera(s) within the network.

Page 75 / 127

74

2.

Select the camera you want by highlighting it, and then click

Add Camera

.

3.

Click

Save

, and then click the

System Configuration

button to

return to View Window. The selected camera’s video will be

displayed now. You can click

Save as

to save the selected

cameras into the desired path and the selected cameras can be

reloaded by

load

button.

The camera found

within the network.

Click the

Add

Camera

button.

The camera is added.

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share