1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TPE-80WSv4

TRENDnet TPE-80WSv4 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of TRENDnet TPE-80WSv4 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 9
TPE-80WS
Quick Installation Guide
Page 2 / 9
Table of Contents
Version 07.19.2007
English
......................................................................................................
1
1
2
3
4
1. Before You Start
2. Hardware Installation
.........................................................................
3. Configuring the Power Over Ethernet (PoE) Switch
..........................
................................................................................
Troubleshooting
........................................................................................
Page 3 / 9
System Requirements
1. Before You Start
English
1
Package Contents
Application
?
?
?
?
?
?
TPE-80WS
Quick Installation Guide
User's Guide CD-ROM
RS-232 Cable
Power Cord
Rack Mount Kit
?
(4.7 or higher).
?
A computer with a network adapter properly installed.
?
A RJ-45 network cable.
?
Web Browser: Internet Explorer (5.5 or higher) or Netscape Navigator
EIA standard 19” rack (Optional)
Note: The TPE-80WS only support Power over Ethernet (PoE) devices that
follow the IEEE 802.3af standard
8-Port Gigabit Web
Smart PoE Switch
(TPE-80WS)
108Mbps 802.11g
Hot-Spot Access Point
(TEW-453APB)
PoE Internet
Camera Server
(TV-IP201P)
Advanced Wireless Pan & Tilt
Internet Camera Server
(TV-IP400W)
Power over Ethernet
(PoE) Spli ter
(TPE-102S)
108Mbps 802.11g
Wireless Access Point
(TEW-450APB)
Advanced Day/Night Internet
Camera Server with Audio
(TV-IP301)
54Mbps 802.11g Wireless
PoE Access Point
(TEW-434APB)
Power over Ethernet
(PoE) Spli ter
(TPE-102S)
Power over Ethernet
(PoE) Spli ter
(TPE-102S)
Power + Ethernet Data
Page 4 / 9
2. Hardware Installation
English
2
3.
Connect a RJ-45 cable from a PoE
port
on the TPE-80WS to the
LAN
Port of the PoE device (e.g.
TEW-434APB)
4.
Verify that the following panel lights
are on:
POWER, OPERATING and
LINK/ACT
2.
Connect a RJ-45 network cable
from the computer to an available
Ethernet port on the TPE-80WS.
1.
Connect the
Power Cord
to the
rear of the TPE-80WS and then
to a power outlet.
Page 5 / 9
English
3
1.
Open your web browser, type
in the
Address bar, and then press
Enter
.
Web Browser
3. Configure the Power Over Ethernet (PoE) Switch
Note: It is recommended that you configure the PoE Switch from a wired
computer.
Before the PoE Switch can be configured, a Static IP address must
be assigned to your computer's network adapter in the subnet of
192.168.223.x.
Since the PoE Switch's default IP address is 192.168.223.100,
make sure no other network devices are assigned an IP address of
192.168.223.100.
(Refer to Troubleshooting section on how to configure
TCP/IP settings on your PC.)
3.
Click
Configuration
and then click
System
.
Configure the IP
Address, Subnet Mask and
Gateway to match your network
and then click
Apply
.
Your installation is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
For detailed information regarding the
TPE-80WS's
configuration and
advanced settings, please refer to the Troubleshooting section, User's
Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com
2.
Enter the Password, and then click
Apply.
By default:
Password:
admin

Rate

3.5 / 5 based on 2 votes.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top