Page 16 / 110
Scroll up to view Page 11 - 15
- 16 -
3.
The InstallShield Wizard starts to install the software, and the
Progress bar indicates the installation is proceeding.
4.
When completed, click
Finish
.
After installing the utility, the application program for the print server
is automatically installed to your computer, and creates a folder in
Start\Programs\PS-Utility
.
Using PS-Utility
This section describes the operation of PS-Utility.
To launch PS-
Utility:
1.
Click
Start
->
Programs
->
PS-Utility
, and then click the
PS-
Utility
item.
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 110
- 17 -
2.
The main screen will appear as below, and it starts to search the
connected print server within the network.
Component Features:
1.
Device List:
Display the connected print server within the
network.
2.
Control Buttons
-
Change IP Address:
Click this button to
bring up the following
dialog box, allowing
you to change the IP
Address.
In this dialog
box, you can select
either
Manually Assign
or
DHCP Assign
Automatically
.
When
Your print server
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 110
- 18 -
completed, click
OK
.
-
Update Firmware:
Click this button to update the firmware
of the selected print server.
-
Show Web Setup:
Click this button to open your web
browser and launch the Configuration Utility.
Alternately,
you can double-click the print server in the Device List to
launch the Configuration Utility.
-
Factory Reset:
Click this button to reload the factory settings
of the print server.
-
Discover Device:
Click this button to search the connected
print server again.
-
About:
Click this button to bring up a window containing the
basic information of PS-Utility.
-
Close:
Click this button to exit PS-Utility.
3.
Information Field:
Display the basic information of the selected
print server in the Device List.
4.
Status Bar:
Display the system status.
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 110
- 19 -
PS Wizard
PS Wizard is a convenient utility that allows you to set up the print
server’s port connection.
Windows 2000/XP/2003/Vista
1)
Insert the Installation CD-ROM into your computer’s CD-
ROM drive. Click
PS Wizard
and then click
2000/XP/Vista
from the Auto-Run menu screen.
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 110
- 20 -
2)
Select the print server, select the desired port and then click
Add Printer.
3)
Click Select from manufacturer list.
Select the appropriate
driver for your printer and then click
Next
.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live